Feature:
1. SJ768 OILING WITH GREASE, 1 TO 3 MONTH DO ONE TIME OILING , NO REQUIRED DAILY OILING, EASY OILING SCHEDULE
2. WEFT BEATING WITH CAM SYSTEM, BETTER WEFT INSERTION POWER , GOOD FABRIC EFFECTS
3. SMALL OPENING SCHEDDING ,LESS WEFT BREAKAGE
4. COMPARE WITH SJ736B MODEL , SJ768 MODEL SPEED IS 30 RPM TO 50 RPM FASTER
5. FULLY SERVO CONTROL SYSTEM, SERVO TAKE UP/ SERVOP LET OFF / WITH STEP MOTOR COLOR SELECTOR
6. APPLY HIGH SPEED LOOM TEMPLE SYSTEM, WITH BETTER FABRIC BORDER EFFECT , LESS PIN HOLES
7. WITH CAM BEAT UP, MACHINE MORE STABLE WITH LESS VIBRATION
Medium Speed, Shuttless Loom, Medium Speed Textile Rapier Loom,Medium Speed Flexible Rapier Loom,Postive Cam Dobby Rapier Loom SHAOXING TEXTILE MACHINERY GROUP COMPANY , https://www.textileweavingmachine.com
Products Detail
1.Product Name: Sanitary Pneumatic Angle Seat Valve
2.This angle seat valve is the new generation of pneumatic angle seat valve researched and developed by our company. It widely used in sanitary pipeline and chemical process, sterilization machine, disinfector, dryer, beer production and etc. ]
3.Performance and advantage:Visual position instruction, connect limit switch or emergency manual device.
4.Easy installation, air controller can rotate by 360 degrees, and limit switch can rotate by 360 degrees. It can convenient install to one to two limit switches.
5.Advanced air actuator: thicken engineering plastic shell, safe and reliable; low wear piston, large capacity and low air consumption; self-lubricated internal components, maintenance-free.
6.Long-lived lead stem: valve stem with wedge PTFE sealing, avoiding dirt; Self-lubricated, maintenance-free; stem fixed perfect and can automatically correct location.
7.Advanced valve body: flow 30% bigger than general angle seat, smaller volume and better fluid flow pattern.
Â
8.Technical Parameters
Working Pressure: 0-1.6MPa;
Working Temperature: -10ºC ~+200ºC;
Body Material: S.S.304/ 316
Sealing Material: PTFE, EPDM;
Air Pressure: 5-8bar;
Connection: female, clamped, flanged.
