Propylene Glycol Monomethyl Ether
Propylene Glycol Monomethyl Ether Uses (PGME or 1-methoxy-2-propanol) is an organic Solvent Raw Material with a wide variety of industrial and commercial uses.Similar to other glycol ethers, it is used as a carrier/solvent in printing/writing inks and paints/coatings. It also finds use as an industrial and commercial paint stripper. It is used as an antifreeze in diesel engines.
Pgme Solvent Sds (Propylene Glycol Monomethyl Ether), a medium-boiling glycol ether, is an active solvent for cellulose acetate butyrate, nitrocellulose, epoxy, phenolic, acrylic, and alkyd resins. It is used in a variety of coating, printing ink, and cleaning applications.
The chemical substances for this Pvc Resin product are listed as Inert Ingredients Permitted for Use in Nonfood Use Pesticide Products, and in Food Use Pesticide Products with limitations, under the Federal Insecticide, Pgme Sds Fungicide, and Rodenticide Act (FIFRA).
These glycol ethers are transported by marine, road and rail, primarily in bulk quantities, but
also as packed products. Due to their flammability, they are classified as Ethylene-Vinyl Acetate hazardous Pgme Solvent Msds for
transport under transport regulations.
Glycol ethers should be stored at ambient temperatures away from sources of ignition and
substances with oxidising or corrosive properties.
Propylene Glycol Monomethyl Ether Uses,Pgme Solvent Sds,Pgme Sds,Pgme Solvent Msds HENAN LIHAO CHEM PLANT LIMITED , https://www.lihaochemicals.com
ZGB series Introduction:
ZGB series is of high efficiency, large capacity, high head ones and can be multi-staged slurry pumps, widely used for carrying abrasive or corrosive slurry in industrial sectors such as electricity, metallurgy, mine, coal, building material and chemical engineering.
Â
Â
Features:
1. High efficiency and low abrasion
2. Can be connected in multi-stage in series under the allowable pressure(3.6MPa)
3. Bearing is lubricated with thin oil which can operate under low temperature by setting the lubrication and cooling system reasonably
Â
Specification:
D: 390--760 mm                                                               Â
Q: 1.0-533.3 L/s                          Â
H:Â 3.1-94.2Â m
ZGB Pump Perormance Chart:
Â
Pump Model
Allowable
Max. PowerClear Water Performance
Â
Impel. Dia. (mm)
Capacity (Q)
Head H(m)
Speed (r/m)
Effi. (η%)
NPSH(m)
65ZGB(P)
28.8-19.9
31.7-15.8
58-61
1480
62.5-47.4
4.5-3.0
390
8.37-5.8
21.0-10.5
25.4-26.7
980
62.5-47.4
2.0-1.3
Â
Â
80ZGB(P)
 73.7-52.2
56.7-28.3
87.5-91.6
980
66.1-48.7
5.2-2.7
485
21.4-15.2
37.5-18.8
38.4-40.2
740
66.1-48.7
2.3-1.2
56.8-40.4
52.0-26.0
73.7-77.1
980
66.1-48.7
4.4-2.3
445
16.5-11.7
34.4-17.2
32.3-33.8
740
66.1-48.7
1.9-1.0
41.3-29.2
46.8-23.3
59.5-62.3
980
66.1-48.7
3.5-1.8
400
12.0-8.4
31.0-15.4
26.1-27.3
740
66.1-48.7
1.5-0.8
Â
Â
100ZGB(P)
 124.9-91.4
116.7-58.3
85.1-91.8
1480
77.9-57.4
6.0-2.6
500
36.3-26.6
77.3-38.6
37.3-40.3
980
77.9-57.4
2.7-1.2
91.0-66.7
105-52.5
68.9-78.4
1480
77.9-57.4
4.9-2.1
450
26.4-19.4
69.5-34.8
30.2-32.6
980
77.9-57.4
2.1-1.1
64.0-46.9
93.4-46.7
54.5-58.8
1480
77.9-57.4
3.8-1.7
400
18.6-13.6
61.8-30.9
23.9-25.8
980
77.9-57.4
1.7-0.8
Â
Â
150ZGB(P)
 215.0-165.5
200-100
85.2-90.0
980
77.7-53.3
3.8-2.7
740
92.7-71.3
151.2-75.6
48.6-51.3
740
77.7-53.3
2.2-1.5
168.0-129.3
182.4-91.2
73.0-77.1
980
77.7-53.3
3.3-2.3
685
74.2-56.8
140.0-70.2
41.6-44.0
740
77.7-53.3
1.9-1.3
131.9-101.5
169.2-84.6
61.8-65.2
980
77.7-53.3
2.8-1.1
630
57.6-44.3
129.6-64.8
35.2-37.2
740
77.7-53.3
1.6-0.6
Â
Â
200ZGB(P)
 342.9-219.1
300.0-150.0
89.0-94.2
980
76.3-63.2
6.7-2.7
740
147.5-97.3
226.5-113.3
50.7-53.7
740
76.3-63.2
3.8-1.5
290.2-185.8
283.8-141.9
79.6-84.3
980
76.3-63.2
6.0-2.4
700
125.0-80.0
214.3-107.1
45.4-48.1
740
76.3-63.2
3.4-1.4
222.0-141.8
259.5-129.7
66.6-70.5
980
76.3-63.2
5.0-2.0
640
95.6-61.0
195.9-97.9
38.0-40.2
740
76.3-63.2
2.9-1.1
Â
Â
250ZGB(P)
 421.2-275.6
400.0-200.0
84.0-90.1
980
78.2-63.2
7.3-3.3
740
181.4-118.7
302.0-151.0
47.9-51.4
740
78.2-63.2
4.2-1.9
356.7-233.2
378.4-189.2
75.2-80.6
980
78.2-63.2
7.1-3.0
700
153.7-100.5
285.7-142.9
42.9-46.0
740
78.2-63.2
4.0-1.7
278.8-137.9
348.6-131.6
63.8-68.5
980
78.2-63.2
5.5-2.5
645
120.1-59.4
263.2-99.4
36.4-39.1
740
78.2-63.2
3.1-1.4
Â
Â
300ZGB(P)
 542.8-357.6
533.3-266.7
84.3-93.4
980
81.2-68.3
6.9-3.5
760
233.9-154.0
402.7-201.3
48.1-53.3
740
81.2-68.3
3.9-2.0
429.4-282.9
493.3-246.7
72.1-79.9
980
81.2-68.3
5.9-3.0
703
184.8-116.4
372.5-177.9
41.1-45.6
740
81.2-68.3
3.4-1.7
333.3-219.7
453.3-226.7
60.9-67.5
980
81.2-68.3
5.0-2.5
646
Application:
ZGB series is widely used in metallurgy, mining, mineral processing, dredging, de-watering, water treatment, coal washing, mill, cyclone feed, tailing, power, building material...etc. various industrial sites. For different duties, ZGB pump is named as High head pump, High pressure pump, Mineral processing pump, Mill discharge slurry Pump, Booster pump, Feeding pump, Tailing pump,Transfer pump Thickner Underflow Pump, De-watering screen pump, Pressure pump, Concentrate pump............
 Â
Product Description
ZGB series Introduction:
ZGB series is of high efficiency, large capacity, high head ones and can be multi-staged slurry pumps, widely used for carrying abrasive or corrosive slurry in industrial sectors such as electricity, metallurgy, mine, coal, building material and chemical engineering.
Â
Â
Features:
1. High efficiency and low abrasion
2. Can be connected in multi-stage in series under the allowable pressure(3.6MPa)
3. Bearing is lubricated with thin oil which can operate under low temperature by setting the lubrication and cooling system reasonably
Â
Specification:
D: 390--760 mm                                                               Â
Q: 1.0-533.3 L/s                          Â
H:Â 3.1-94.2Â m
ZGB Pump Perormance Chart:
Â
Pump Model
Allowable
Max. PowerClear Water Performance
Â
Impel. Dia. (mm)
Capacity (Q)
Head H(m)
Speed (r/m)
Effi. (η%)
NPSH(m)
65ZGB(P)
28.8-19.9
31.7-15.8
58-61
1480
62.5-47.4
4.5-3.0
390
8.37-5.8
21.0-10.5
25.4-26.7
980
62.5-47.4
2.0-1.3
Â
Â
80ZGB(P)
 73.7-52.2
56.7-28.3
87.5-91.6
980
66.1-48.7
5.2-2.7
485
21.4-15.2
37.5-18.8
38.4-40.2
740
66.1-48.7
2.3-1.2
56.8-40.4
52.0-26.0
73.7-77.1
980
66.1-48.7
4.4-2.3
445
16.5-11.7
34.4-17.2
32.3-33.8
740
66.1-48.7
1.9-1.0
41.3-29.2
46.8-23.3
59.5-62.3
980
66.1-48.7
3.5-1.8
400
12.0-8.4
31.0-15.4
26.1-27.3
740
66.1-48.7
1.5-0.8
Â
Â
100ZGB(P)
 124.9-91.4
116.7-58.3
85.1-91.8
1480
77.9-57.4
6.0-2.6
500
36.3-26.6
77.3-38.6
37.3-40.3
980
77.9-57.4
2.7-1.2
91.0-66.7
105-52.5
68.9-78.4
1480
77.9-57.4
4.9-2.1
450
26.4-19.4
69.5-34.8
30.2-32.6
980
77.9-57.4
2.1-1.1
64.0-46.9
93.4-46.7
54.5-58.8
1480
77.9-57.4
3.8-1.7
400
18.6-13.6
61.8-30.9
23.9-25.8
980
77.9-57.4
1.7-0.8
Â
Â
150ZGB(P)
 215.0-165.5
200-100
85.2-90.0
980
77.7-53.3
3.8-2.7
740
92.7-71.3
151.2-75.6
48.6-51.3
740
77.7-53.3
2.2-1.5
168.0-129.3
182.4-91.2
73.0-77.1
980
77.7-53.3
3.3-2.3
685
74.2-56.8
140.0-70.2
41.6-44.0
740
77.7-53.3
1.9-1.3
131.9-101.5
169.2-84.6
61.8-65.2
980
77.7-53.3
2.8-1.1
630
57.6-44.3
129.6-64.8
35.2-37.2
740
77.7-53.3
1.6-0.6
Â
Â
200ZGB(P)
 342.9-219.1
300.0-150.0
89.0-94.2
980
76.3-63.2
6.7-2.7
740
147.5-97.3
226.5-113.3
50.7-53.7
740
76.3-63.2
3.8-1.5
290.2-185.8
283.8-141.9
79.6-84.3
980
76.3-63.2
6.0-2.4
700
125.0-80.0
214.3-107.1
45.4-48.1
740
76.3-63.2
3.4-1.4
222.0-141.8
259.5-129.7
66.6-70.5
980
76.3-63.2
5.0-2.0
640
95.6-61.0
195.9-97.9
38.0-40.2
740
76.3-63.2
2.9-1.1
Â
Â
250ZGB(P)
 421.2-275.6
400.0-200.0
84.0-90.1
980
78.2-63.2
7.3-3.3
740
181.4-118.7
302.0-151.0
47.9-51.4
740
78.2-63.2
4.2-1.9
356.7-233.2
378.4-189.2
75.2-80.6
980
78.2-63.2
7.1-3.0
700
153.7-100.5
285.7-142.9
42.9-46.0
740
78.2-63.2
4.0-1.7
278.8-137.9
348.6-131.6
63.8-68.5
980
78.2-63.2
5.5-2.5
645
120.1-59.4
263.2-99.4
36.4-39.1
740
78.2-63.2
3.1-1.4
Â
Â
300ZGB(P)
 542.8-357.6
533.3-266.7
84.3-93.4
980
81.2-68.3
6.9-3.5
760
233.9-154.0
402.7-201.3
48.1-53.3
740
81.2-68.3
3.9-2.0
429.4-282.9
493.3-246.7
72.1-79.9
980
81.2-68.3
5.9-3.0
703
184.8-116.4
372.5-177.9
41.1-45.6
740
81.2-68.3
3.4-1.7
333.3-219.7
453.3-226.7
60.9-67.5
980
81.2-68.3
5.0-2.5
646
Application:
ZGB series is widely used in metallurgy, mining, mineral processing, dredging, de-watering, water treatment, coal washing, mill, cyclone feed, tailing, power, building material...etc. various industrial sites. For different duties, ZGB pump is named as High head pump, High pressure pump, Mineral processing pump, Mill discharge slurry Pump, Booster pump, Feeding pump, Tailing pump,Transfer pump Thickner Underflow Pump, De-watering screen pump, Pressure pump, Concentrate pump............
 Â
Coarse Tailling Handling Gravel Centrifugal Slurry Pump
Model NO.: 150ZGB
Position of Pump Shaft: Horizontal Pump
Pump Casing Combined: Horizontal Split Pumps
Mounting Height: Suction Centrifugal
Impeller: Closed
Usage: Pumps
Type: Centrifugal End Suction Slurry Pump
Material: High Chrom Alloy, SA05 27%, ASTM532, Classiii
Casing: Horizontal Split Casing Pump
Color: Any
Application: Sewage
Power: Electric
Slurry Pump Type: Heavy Duty Slurry Pump
Store: Available
Trademark: Sunbo
Transport Package: Free Fumigation Wooden Crate
Specification: ISO; CE; SGS
Origin: China
HS Code: 841370
Model NO.: 150ZGB
Position of Pump Shaft: Horizontal Pump
Pump Casing Combined: Horizontal Split Pumps
Mounting Height: Suction Centrifugal
Impeller: Closed
Usage: Pumps
Type: Centrifugal End Suction Slurry Pump
Material: High Chrom Alloy, SA05 27%, ASTM532, Classiii
Casing: Horizontal Split Casing Pump
Color: Any
Application: Sewage
Power: Electric
Slurry Pump Type: Heavy Duty Slurry Pump
Store: Available
Trademark: Sunbo
Transport Package: Free Fumigation Wooden Crate
Specification: ISO; CE; SGS
Origin: China
HS Code: 841370
Product Description