The sewage collection capacity of the compression garbage truck is reflected in the design of the recovery tank. There are usually two methods. One is to place the recovery tank in the lower front of the filler, which can better use the filler and the lower part of the box. The space between the vehicles can also reduce the rear suspension of the vehicle and increase the departure angle. However, the capacity of the recovery tank is small and the potential for expansion is small. The other option is to locate the recovery tank under the filler floor and to abandon the use of fillers. The space between the lower part of the car body increases the rear suspension of the car, reduces the departure angle, and the capacity of the sewage tank is large. The potential for expansion is also great. In the second solution, the expansion tank expansion method is to fill the tank. Part of the space is used to collect sewage. Plastic Chair Injection Molding Machine Plastic Chair Injection Molding Machine,Plastic Chair Blowing Machine,Plastic Small Chair Making Machine,Plastic Bucket Injection Moulding Machine Ningbo Jietan Machinery Equipment Trading Co., Ltd. , https://www.jietanmachinery.com
For a compact garbage truck with a capacity of about 5 tons, the filling space of the conventional recovery tank and the filler is independent. Regardless of the utilization of the filling space, the capacity of the recovery tank is only 120L, which does not fully meet the sewage collection requirements. However, 4 to 5 round holes of about 20mm are opened laterally at the bottom of the filler floor, connecting the two spaces. The volume of the sewage tank has more than doubled and the capacity for collecting sewage has greatly increased. In contrast, the volume of the first type of recovery tank is limited to between 60 and 80 L, and it is often side-loaded waste water.