Measures to reduce the difference in metal balance

The main measures to reduce the metal balance differences are:
1. Calculate the amount of raw ore and factory concentrates.
2. Measure the grade of ore, concentrate and tailings.
3. Strengthen sampling, processing and laboratory work.
4. new construction, renovation of beneficiation plants, to create conditions for the preparation of metal balance.

Carbon Steel Sheet

Mild steel 1.
Low carbon steel has a carbon content of 0.04-0.3% and is the most common grade of carbon steel. Mild steel is also considered low carbon steel because it is defined as having a low carbon content of 0.05 to 0.25%. Mild steel is malleable and highly malleable and can be used in automotive body parts, panels and wire products. At the high end of the low carbon range, with up to 1.5% manganese, mechanical properties are suitable for stampings, forgings, seamless tubes and boiler plates.
2. The medium carbon steel
The carbon content of medium carbon steel ranges from 0.31 to 0.6%, and the manganese content ranges from 0.6 to 1.65%. The steel can be heat treated and quenched to further adjust the microstructure and mechanical properties. Popular applications include shafts, axles, gears, rails, and railway wheels.
3, high carbon steel
High carbon steel has a carbon content of 0.6-1% and a manganese content of 0.3-0.9%. The characteristics of high carbon steel make it suitable for use as spring and high strength wire. These products shall not be welded unless a detailed heat treatment procedure is included in the welding procedure. High carbon steel is used for cutting tools, high strength wires and springs.
4, ultra-high carbon steel
Ultra-high carbon steels have a carbon content of 1.25-2% and are known as experimental alloys. Tempering can produce very hard steel, which is useful for applications such as cutting tools, axles or punches.

Carbon Steel Sheet,Carbon Steel Sheet Metal,High Carbon Steel Plate,Carbon Sheet Metal

Shandong Panhua Metal Material Co. LTD , https://www.panhuametal.com