With the development of the economy, the cranes for many jobs now begin to operate gradually using wireless remote control. The remote control operation mode has the operating characteristics of improving labor conditions, saving human resources costs, and improving work efficiency. Its flexibility and humanized design are undoubtedly its unique advantages. The use of wireless remote control mode of operation, to a certain extent, to avoid the driver's personal accident safety may be caused by the crane off the track or heavy objects fall. It can continuously operate without fatigue and effectively control the periphery of the safe work. In addition, the wireless remote control lift truck with the emergency stop control operating system can effectively ensure the operation safety. How to operate the wireless remote control crane safely? Let's look at the following together with Xiao Bian! Safety requirements for wireless remote control of truck crane 1. When using the wireless remote control truck crane, it should have various protection functions of the original truck crane, such as various protections such as zero position, over-current, and travel. When the remote controller's operation uses a non-automatic reset, all the joysticks before the operation should be zeroed so that the control command can be issued. 2, the wireless remote control truck crane need to set up a total contactor or voltage breaker tripped air circuit breaker to achieve the total power to cut off the crane with the function. The power supply for all devices must be drawn from the mains contactor. When the main power contactor or circuit breaker with a voltage-lost trip operates, it is necessary to be able to cut off the total power supply of all the mechanisms, and the operation of all the mechanisms stops. 3, wireless remote control truck crane is generally equipped with a clear remote indicator light to remind us whether the aircraft is operating the remote control. 4. When a truck crane is operated by both a remote control and a driver's cab, the interlocking reactions between the two should be combined to achieve safe operation. 5. The ability to resist the same frequency interference signal is a very important point in the safe operation of the radio remote control system. No erroneous actions are allowed when resisting the same frequency interference. When the control receiver is directly connected to the strong power system, there will be a great deal of various types of interference. Therefore, its reliability and anti-jamming are very important here, and it is the basic condition for the system to be put into use. Through the above description we can see. The use of wireless remote crane can meet a variety of different operating environments. In the case of its safe use, and the traditional manual control of the truck crane can not only save labor, save time, but also reduce input costs and increase production efficiency, of course, is the king of safe operation. I hope the above Xiaobian article will help you! Carbon Steel Plate is a kind of steel with a carbon content of less than 2.11% and no deliberate addition of metal elements. It can also be called ordinary carbon steel or carbon steel. In addition to carbon, there are also a small amount of silicon, manganese, sulfur, phosphorus and other elements inside. The higher the carbon content, the better the hardness and strength, but the plasticity will be worse. " Carbon Steel Plate,Carbon Steel Sheet,High Carbon Steel Plate,Low Carbon Steel Plate Shandong Rizhaoxin Metal Products Co., Ltd. , https://www.rizhaoxinsteel.com
