Solas 6 Persons Fast Rescue Boats with Single Arm Davit and Launching Appliance

Model NO.: Fast Rescue Boats
Capacity: 6-16 Persons
Engine Type: Inboard or out Board Engine (as Client′s Request)
Trademark: DEYUAN
Transport Package: Nude Packing
Specification: as below data sheet
Origin: China
HS Code: 8906901000

Solas 6 Persons Fast Rescue Boats with Single Arm Davit and Launching Appliance
 

Specification:

New type inflatable fender fast rescue boat,it will not make any inquiry for the drawing people 

during the rescuing work.
 

Inflatable Fender Fast Rescue Boat Technical Parameter:

type

Main dimension (M)

Passenger

Navigation speed

Host/power kw

Weight kg

Full weight

6.08B-1

6.0*2.3*1.0

15

3person≥20kn

YAMAHA 4LHA-HTP/DTP/STP BUKH+STEYR SOLAS144/236

1450

2687.5

6.08B-2

6.0*2.3*1.0

15

15person≥8kn

Mercury 60-90HP

1190

2427.5

 

Note:

Common type and fire-resistant type lifeboats are available.

Other choise for the engine:SABB(21.6KW),BUKH(21.3KW),YANMAR(22.1KW)

 

How to order:

1 With motor or without 

2 Capacity or length

3 Accessories

 

Packaging & Delivery

Packaging Details:    Standard packing
Delivery Detail:   Around 45 days

Solas 6 Persons Fast Rescue Boats with Single Arm Davit and Launching ApplianceSolas 6 Persons Fast Rescue Boats with Single Arm Davit and Launching Appliance
Contact: Anna Wong
China Deyuan Marine Fitting Co., Ltd.
Subsidiary: Zhuhai City Deyuan Import & Export Co., Ltd.
Tel: +86-756-6302052
Fax: +86-756-8305812
MP: +86-13798955790
 
http://www.deyuanmarine.com 

 

Description:

The ignition analyzer can be used to measure each cylinder speed of the car engine, high voltage ignition coil ignition voltage and the injection time of each cylinder. It is induction type, without dismantling any pats, you can test the general distributor type SPW and ignition coil type COP. It can dynamically display the parameters and display the maximum and minimum range.

 

1. Measures RPM
2. Measures spark volt
3. Measures spark burn time
4. Advanced microcontroller technology
5. No ground wire connections required

 

Functions:
1. Minimum and Maximum functions (For COP and SPW modes)
It maintains a continuous record of the minimum and maximum readings of the function currently selected. To display the Minimum and Maximum readings of the main display, if not already selected press` Secondary Function/Capture` Button momentarily. To reset the Minimum and Maximum readings, press the `Power ON/OFF/Reset` button momentarily. These values are also rest when turning to [0".


2. Spark KVOLT Calibration function (For Cop mode only)
It requires the user to calibrate the instruments in order to measure spark KVOLT in coil on plug and coil near plug ignition systems.
This calibration uses the measurement values obtained during the procedure to find the optimal measuring parameters or a particular type of ignition module, and compensates for differences in waveform and signal strength.
Once the Ignition Tester has been calibrated on one of the ignition modules of the engine being diagnosed, all the subsequent measurement of spark KVOLT will be relative to the calibration value. 

 

Features:
1. Capacitive pick-up
2. Flexible probe
3. Protective rubber holster
4. LCD display
5. Power ON/OFF/RESET button
6. Secondary Function/Capture button
7. Ignition system button
8. Main Function/Calibrate button
9. Engine Cycles button.

Ignition Tester

Ignition Tester,Ignition Coil Tester Tool,Ignition Coil Test,Ignition Spark Tester

Shenzhen Cartrend Technology Co, Ltd , http://www.cartrendthings.com