Classification of gantry type Milling Machine Gantry Type Milling,Gantry Type Milling Machine,Gantry Milling,Gantry Milling Machine,Gantry machining center Jiangsu Hoston Machine Tools Co., Ltd. , https://www.hosdunmachinetools.com
This VST-2000 viscosity tester, under GB265-88, G1814, ASTMD445, IP71 and other standards, adopts advanced SCM for control, large color LCD screen in English, operation tips, high-speed thermal printer, advantages of auto-storage and auto-printing of testing results and uniform temperature of homeothermic bathtub. It can be installed with four viscometers simultaneously for oil viscosity testing, and also can be high-viscosity homeothermic water bath for other testing.
Â
Features:
1. Advanced SCM for control; intelligent temperature control; large color LCD screen with menu for operation tips.
2. Unique and advanced modular technology to be capable of testing oil of both high-viscosity and low-viscosity.
3. Function of regularly indicating working conditions, including temperature, time, parameters and so on.
4. Equipped with ten-liter homeothermic bathtub and organic glass-made stay-warm case outside, with advantages of uniform temperature inside bathtub and effective temperature control.
5. Stainless steel heater and components, anti-corrosion and durable, and ring-type daylight lamp for lighting, easy to observe.
6. Capillarimeter clutch is three-point vertical type, flexible and convenient operation and reliable grasp.
7. Automatically calculating kinematic viscosity value and average value of testing results, printing and memorizing results.
8. Advantages of accurate testing, visualized display, auto-timing, auto-calculation and auto-printing results.
Technical Parameters:
Performance Standards
GB265-88, GB1814,ASTM D445,IP71, etc.
Capillary Viscometer
Conform to SH/T0173-92 Technical Conditions of Glass Capillary Viscometer
Conform to JJG155 Verification Regulation of Routine Capillary Viscometer
Method of Display
7 inch color LCD
Temperature Control Range
-60-99ºC
Testing Range
Kinematic Viscosity:0.5~20000mm2/s
Kinetic Viscosity:0.3~40000mPa.s
Temperature Control Accuracy
±0.1ºC
Timing Accuracy
±0.1S
Timing Range
0.1S-999.9S
Homoeothermic Bathtub
300×300mm double layer
Printer
Thermal printer, high-speed and lower consumption, with 55 millimeter-wide printing paper
Temperature Testing Components
Precise imported platinum electric resistance
Stirring Speed
1520Rounds/Min
Heating power
800WÂ
Sample Installing Quantities
4 pieces
Working Environment
Temperature: 0ºC~40ºC  Relative Humidity: <80%
Power Supply
AC220V±10% 50Hz
Dimension(largest)
560*370*520(L*W*H)
Weight
20Kg
 Our Service                                      Â
Pre -sale Service: Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â After-sale Service:
1. Reply promptly in 24 hours with fluent English      1. The warranty period is 24 months from commissioning
and professional knowledge. Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â acceptance date on. After the warranty period is over we
2. Provide best necessary spare parts at low          provide lifelong maintenance and technical service.
price (some for free).                            2. We guarantee the maintenance time no more than 3Â
3. If there is something wrong with the equipment,    working days and response time within 1 hour.  Â
give a response and provide the solutions in 24h      3. We build instrument service profile for our clients to
4. Provide long term technical support and innovation  record the product service and maintenance conditions.
upgrade guidance. Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â 4. After instruments start service, we will pay follow-ups
5. OEM is available for TOP Products.                 to collect the service conditions.
6. Protect sales area, ideas of design and all your
private information.
Our Company:
Chongqing TOP Oil Purifier Manufacture Co., Ltd is a professional leading manufacturer of oil purifiers and oil testers. We have tremendous strength in the fields of research, development and manufacturing with professional mass-production ability, perfect sales network, excellent after-sales service as well as a perfect image we earned in the competitive market.Â
Our main products are: Insulting Oil Purifier, Turbine Oil Purification machine, Hydraulic Oil Purifier, Lubricating oil filtration machine, Transformer Oil filtering machine, fuel oil restoration, Steam-Turbine Oil reconditioner, Dielectric fluid regeneration system, Circuit-Breaker Oil recovering system, Compressor Oil recovering machine, Gear Oil renewal machine, Coolant Oil treatment, Quenching Oil reclaiming machine, Oil and Water Separator, Steel-Rolling Oil regeneration equipment, Waste automobile Oil Recycling equipment, petroleum machine and Oil Tester, etc.Â
Our oil filtration machine:Â
Series ZY Single-Stage Vacuum Transformer Oil PurifierÂ
Series ZYD Double High Vacuum Transformer Oil PurifierÂ
Series ZYB Multiply-Function insulating oil treatment machineÂ
Series TY Turbine Oil Purification Apparatus
Series TYA Lubricating oil/ hydraulic oil purification unitÂ
Series TYB Portable light Fuel oil purification machineÂ
Series TYD Vacuum dehydratorÂ
Series TYF Phosphate ester fire-resistance oil purifierÂ
Series PL Plate pressure oil purifierÂ
Series TYD Vacuum dehydratorÂ
Series EFD Explosion protection filtration machineÂ
Series BAM Press filtration systemÂ
Series ZKCC Vacuum pumping deviceÂ
Series COP Cooking oil purification machineÂ
Series CYS Centrifugal oil purification machineÂ
Series JL Portable oil filtering and oiling machine
Petroleum Products General Testers:
1.Fully Automatic Karl Fischer Water Content Tester TP-2100
2.Digital Karl Fischer Water Content Tester TP-6A
3.Kinematic Viscosity Tester VST-2000
4.Kinematic Viscosity Tester TPV-8
5.Kinematic Viscosity Tester VST-3000
6.Fully Automatic Oil Acidity Tester (6 cups) ACD-3000I
7.Fully Automatic Surface/Interface Tension Tester IT-800
8.Automatic Surface/Interface Tension Tester (Platinum Plate Method) IT-800P
9.Fully Automatic Open Cup Flash Point Tester TPO-3000
10.Fully Automatic Closed Cup Flash Point Tester TPC-3000
11.Digital Open Cup Flash Point Tester TPO-100
12.Digital Closed Cup Flash Point Tester TPC-100
13.Cloud Point & Pour Point Tester PT-2000
14.Multi-functional Vibration Tester VBT-2000
15.Automatic Potentiometric Titrator TP668
16.Petroleum Products Density Tester DST-3000
17.Petroleum Products Density Tester TP-109A
18.Karl Fischer Volumetric Water Content Titrator TPD
19.Distillation Range Tester DIL-201
20.Online Oil Quality Tester PTT-002
21.Liquid Phase Corrosion Tester TPS-05
22.Copper Corrosion Tester TP-113
23.Petroleum And Synthetic Liquid Anti-Emulsification Tester TP-122
24.Dew Point Tester DPME-P
25.Portable Chilled Mirror Dew Point Tester TP-1500
(1) Divided by form
According to whether the gantry is moving, it is divided into a gantry fixed table mobile type (about 90% or more) and a gantry mobile type (also called bridge type).
The bridge type gantry milling is characterized by a small footprint and a large carrying capacity. The gantry travels up to 20 meters, making it easy to machine long or heavy workpieces.
According to whether the beam moves on the column, it is divided into two types: moving beam type and fixed beam type; the beam moving on the elevated bed is called overhead type.
(2) Divided by system
It is divided into ordinary type and CNC type. There are also manufacturers to develop digital intelligent gantry milling with ordinary milling and CNC Milling – one button conversion, which is more flexible and practical.
(3) Divided by capability
It`s divided into light, medium and heavy (super heavy) gantry milling.
Performance characteristics
The gantry milling machine has sufficient rigidity, high efficiency, convenient operation, simple structure and comprehensive performance.
The specific performance characteristics vary according to the type, model and manufacturer, and have a lot to do with the technology used.Taking the SK series three-axis CNC gantry milling mentioned above as an example, its performance characteristics are:
1. The vertical milling head is equipped with TX400 heavy-duty gantry milling head, double rectangular guide rail, with strong rigidity;
2.Milling head mounted ball screw, pneumatic broach device, servo motor drive;
3.The side milling head is equipped with a V5 gantry milling head with an independent lubrication device. The lifting is driven by an ordinary reducer, and the frequency control is adopted;
4.Universal milling/CNC milling one-button conversion three-axis CNC system, which can be programmed and operated manually by the expansion panel, which is extremely implementable in the actual machining process;
5.The bed is advanced and retracted, the beam is up and down, and the vertical milling head is equipped with a Taiwan ball screw, which is driven by a servo motor;
6.With timing belt and synchronous wheel;
7.Hand-held electronic handwheel unit for easy three-axis tool setting;
8.Unique beam lifting safety interlocking device to ensure the repeatability of the machine tool;
9.The station standard cycloid pump group is continuously lubricated with low failure rate.
Selected Intelligent Petroleum Products/Oil Viscosity Testing Instrument
Model NO.: VST-2000
Weight: 350kg
Dimension(L*W*H): 1.2m*0.95m*1.5m
Warranty: 2 Years
Color: Any
Trademark: TOP Oil Purifier
Transport Package: Standard Export Wooden Case
Specification: ISO/CE
Origin: Chongqing, China
HS Code: 84212990
Application: