Brass CNC Machining Parts have several key advantages compared to machining other materials. Brass Cnc Machining Parts and components are durable, cost-efficient, and even create a tighter seal for fittings. In addition, brass CNC Machining Parts and turning parts have a high heat and corrosion resistance! SGI 's brass Cnc Machining Parts are easy to machine and join, and made to your specifications and standards!
Brass CNC Machining Parts Brass Cnc Machining Parts,Machining Brass Parts,Customized Machining Brass Parts,Machining Brass Parts Production SG Industry (China) Co.,Ltd , http://www.sgindustrycn.com
Type
DCL-120D
Input Power
3-Phase 380V,50HZ/60HZ
Oscillation frequency
15-20KHZ
Maximum  input power
120KW
Maximum  input current
180A
Cooling Mode
Air cooled
Thermal  conversion efficiency
More than 90%
Temperature
Max 1400°F
Control Model
Digital Control
Resonance
Series Resonance
Warranty
12 Months
Transportation
By sea or By Air
Full Air-cooled Electromagnetic Heater Application Fields with picture:
1.The plastics industry
2.Used in the petroleum pipeline and also the chemical industry.
3.Applied in the Metal Parts Heat Treatment field.
4. Mechanical Industry field.
5. Used in the environment field.
Full Air-cooled Electromagnetic  Heater advantage:
1. Adopt the full-air-cool design, reduce the customer investment and also the using field.
2.The heating efficiency can up to 90%, can save electricity about 30%.
3.No using condition requirement,can used in the mountains and the difficult area.
4.Small volume,light weight,easy operation, can use many machines parallel.
Full Air-cooled Electromagnetic  Heater  Features:
1. Air cooling:Not water cooling, Convenience to install
2.lexible induction coil: Easy to wind on different working piece
3.emperature Controller: Keep the heating process same with PWHT requirement
4.ouching screen: Intuitive to see and easy to operate
5.nduction heating power: High heating speed and heating efficiency, energy Saving
Full Air-cooled Electromagnetic  Heater  working principles:
The induction Heater  will change the 220V or 380V 50/60hz A C current to 15KHZ-20khz high frequency electricity.The high frequency current will produce the high speed changing alternative magnetic field, and makes the metal parts cut the magnetic lines produce the eddy current. The eddy make the Fe which is inside the metal parts fo the high speed random motion,do collisions and friction,produce the heat by itself and in this way to heat the workpiece.
Air-Cooled Induction Heater for Industry Field Application
Model NO.: DCL-120D
HS Code: 8514400090
Air-cooled Induction Heater For Industry Field Application DCL-120D Technical Parameters: