Contact Contact
Aluminum furniture advantage
Folding 1, green environmental protection
No paint, harmless to human body, no magnetism, no radiation, no toxicity, no odor, antibacterial, truly green and healthy
2, waterproof and moistureproof
Aluminum home has the structure of aluminum alloy profile, has the characteristics of moisture-proof and waterproof, fundamentally effectively prevent moisture absorption and mildew due to being in a humid environment.
Folding 3, easy maintenance
All aluminum furniture has smooth and delicate surface, easy to clean and long service life.
Folding 4, value preservation and durability
All aluminum furniture has aluminum alloy metal properties, no deformation, no cracking, no rust, do not fade, the product is firm and durable, under normal conditions of use, can be used for fifty years.Even if the furniture needs to be replaced, it has a high recycling value.
Folding 5, insect and ant prevention
Whole aluminium furniture cabinet body and door plank material use aluminium alloy entirely, after the processing such as surface classics depth oxidation, spray is hard and clinking, not afraid of any insect rat ant.
Folding 6, fire retardant
All aluminum furniture profiles have strong heat resistance, and the melting point of aluminum is 660℃.High heat resistance, even if the whole ignited as to its surface, after a long time burning, reduce safety risks.
Custom Aluminum Furniture,Custom Aluminum Furniture Parts,Custom Aluminum Furniture Cost,Custom Aluminum Furniture Service Jiangyin Yuanlv New Energy Materials.Co.,Ltd , https://www.yuanlvpval.com
Lightweight Compact Hydraulic Cylinder
Whatever our cylinders will applied in-mining and drilling(impact load, heavy duty, dust), marine and offshore(extreme corrosive, low temperature), testing equipment(high speed and frequency) our rich experience in sealing technology, surface technology, structure design makes our products extremely durable, which means a longer service life and lower maintenance costs.
Â
Â
Customer build is the first principle for Betten Hydraulic
We can design piston hydraulic cylinder for what you want if you can provide us the following technical parameters:Â
1. Bore Diameter;Â
2. Piston Diameter;Â
3. Stroke;Â
4. Working pressure;Â
5. Installation Distanc
Â
Technical DataÂ
Series nameÂ
CX Compact Hydraulic Cylinder(Double Acting)Â
Nominal pressureÂ
16MPaÂ
Equipment typeÂ
Standard: SA, FA, FBÂ
Foot type: LDÂ
Inner diameterÂ
Φ32, φ40, φ50, φ63Â
Maximum allowable pressureÂ
16MPaÂ
Test resistance pressureÂ
21MPaÂ
Minimum operating pressureÂ
Below 0.64MPaÂ
Rod tip screwÂ
JIS 6H/6gÂ
Usable temperature rangeÂ
Standard specifications:Â Â
Φ32~φ125: -10ºC~+120ºC (H-NBR)Â
Φ140~φ160: -10ºC~+80ºC (NBR) LD: -10ºC~+120ºC (H-NBR)Â
Applicable hydraulic oilsÂ
General mineral hydraulic oils (If using other hydraulic oils, then please specify as such elsewhere)Â
Main Features
1. Seal kits: From USA, durable and hard-wearing to ensure the small hydraulic cylinder a long service life.
2. Heat treatment: Quenching&Tempering which makes the piston rod super high hardness.
3. Cleaning: Ultrasonic cleaning.
4. Cutting: High precision provided by automatic roller cutting machine.
5. Testing: Ultrasonic detector, spectrograph, CMM, metallography, chrome thickness tester.
6. Advantage: Simple structure & reliable work, easy maintenance & diverse connecting ways of small hydraulic cylinder.
7. Plan: Different manufacturing plans for different customers.
8. MOQ: 10 PCS of small hydraulic cylinders
9. Lead time: 10~30 days depends on the small hydraulic cylinder quantity & whether customized.
10. Warranty: Change a new small hydraulic cylinder and we pay for the air freight in 2 years warranty time.
Packaging &Â Delivery
Mounting TypesÂ
Delivery time depends on the destination and other factors, it may up to 7Â work days.Â
In order to ensure you receive you order tax free upon import, we will declare it as a "Sample"with a lower value. This lower price does not reflect the total price you paid.Â
After we ship the goods, we will email you the shipping information, as well as tracking number. Â
WEIGHTÂ
RECOMMENDED TRANSPORT MEANSÂ
TRANSPORT TIMEÂ
COMMENTSÂ
<50kgÂ
Express-UPS/DHL/FedExÂ
Door to door serviceÂ
3-7 daysÂ
FastÂ
ConvenientÂ
ExpensiveÂ
50-150kgÂ
By airÂ
3-10 daysÂ
Fast;Â Â
Economic;Â Â
Consignee has to do customs clearanceÂ
150>kgÂ
By seaÂ
10-50 daysÂ
Slow;Â Â
Economic;Â Â
It takes some time for customs declarance and clearanceÂ
2X20' or 1X40'Â
By railÂ
20-35 daysÂ
Slow;Â Â
Economic;Â Â
It takes some time for customs declarance and clearance;Â Â
Only full container load accepted (Â MOQ: 2X20' or 1X40' )Â Â
Our Company
Betten Hydraulic-Built Cylinders to Fit Your Needs
As an experienced Hydraulic Cylinder Manufacturer, Betten Machinery is built to develop the overseas business of Boli Hydraulic & Pneumatic Technology Co., Ltd which is known as a professional manufacturer of Oil Cylinder, Pneumatic Cylinder, Hydraulic System and Related Spare Partsin East China.Â
Our factory cover an area of over 5000 square meters and have around 100 stuff including a technical team with more than 20 engineers. Our workshop equipped with over 30 sets of manufacturing and testing machines including machining center, numerical control machine, argon welding machine, plasma cutter etc. Betten has gained the certification of ISO 9001: 2008 and certification of Product Quality Supervision and Inspection Center of Wuxi City. Meanwhile, Betten also got customers' satisfaction for reasonable price, timely delivery and good after-sale service.Â
With the fast development in the past 20 years, we have gained much experience and technology in making various types of Tractor hydraulic cylinder with our expert team. Our products are widely used in equipment such as machine tool, metallurgical equipment, forging machine, kiln equipment, brick machine, plastic machine, car manufacturing machine, construction equipment for road and bridge, wielding machine, port facilities, test machine, fully auto line and we have gained a lot of world famous customer like XCMG, LIUGONG Machinery, Chalco, BOSCH, Haier, SAINT-GOBAIN, Shanghai Boiler, HTC etc.Â
Manufacturing Process
Each Betten Hydraulic RAM has suffered rigorous process and inspection to promise the good quality for our customer.Â
1). Design Services
Our design team has experience in cardan shaft relating to product design and development. If you have any needs for your new product or wish to make further improvements, we are here to offer our support.Â
2). Product Services
Raw materials → Cutting → Forging →Rough machining →Shot blasting →Heat treatment →Testing →Fashioning →Cleaning→ Assembly→Packing→Shipping
3). Samples Procedure
We could develop the sample according to your requirement and amend the sample constantly to meet your need.Â
4). Research & Development
We usually research the new needs of the market and develop the new model when there is new cars in the market.Â
5). Quality Control
Every step should be special test by Professional Staff according to the standard of ISO9001 and TS16949.Â
6). Certification
Should your products require testing and certification to comply with international standards, we can arrange this with independent, fully recognized testing companies such as SGS, Intertec, Bureau Veritas, Lloyd's Register or the testing company of your choice.Â
Hydraulic Cylinder Spare Parts
Piston Rod, seal kits, spherical plain bearing, tubes/pipes, etc.Â
FAQ
1. Are you trading company or manufacture?Â
We are a manufacture for Hydraulic Cylinders and shock absorber piston rod with more than 20 years' history.Â
2. Would you accept the production for small batches?Â
Of course, we would accept it. We also could provide the sample for you.Â
3. Hydraulic cylinder internal leakage?Â
There are 3Â main reasons causing internal leakage: Overload, polishing is not well controlled, bad seal kits. As is known to all, vehicles in China are often overload, our products all designed to bear the overload power. We have numerical control machine to assure the Polish processing.Â
4. Does your piston rod get ruptured easily?Â
Hard chrome plating quenched and tempered 45# steel for piston rod to assure sufficient hardness and toughness.Â
 Pls for free cantact Ciel liang
Tel +8615906192739
 Â
If you want to konw more about us, pls check our official website:
http://www.betten-hydraulic.com/
Lightweight Compact Hydraulic Cylinder
Whatever our cylinders will applied in-mining and drilling(impact load, heavy duty, dust), marine and offshore(extreme corrosive, low temperature), testing equipment(high speed and frequency) our rich experience in sealing technology, surface technology, structure design makes our products extremely durable, which means a longer service life and lower maintenance costs.
Â
Â
Customer build is the first principle for Betten Hydraulic
We can design piston hydraulic cylinder for what you want if you can provide us the following technical parameters:Â
1. Bore Diameter;Â
2. Piston Diameter;Â
3. Stroke;Â
4. Working pressure;Â
5. Installation Distanc
Â
Technical DataÂ
Series nameÂ
CX Compact Hydraulic Cylinder(Double Acting)Â
Nominal pressureÂ
16MPaÂ
Equipment typeÂ
Standard: SA, FA, FBÂ
Foot type: LDÂ
Inner diameterÂ
Φ32, φ40, φ50, φ63Â
Maximum allowable pressureÂ
16MPaÂ
Test resistance pressureÂ
21MPaÂ
Minimum operating pressureÂ
Below 0.64MPaÂ
Rod tip screwÂ
JIS 6H/6gÂ
Usable temperature rangeÂ
Standard specifications:Â Â
Φ32~φ125: -10ºC~+120ºC (H-NBR)Â
Φ140~φ160: -10ºC~+80ºC (NBR) LD: -10ºC~+120ºC (H-NBR)Â
Applicable hydraulic oilsÂ
General mineral hydraulic oils (If using other hydraulic oils, then please specify as such elsewhere)Â
Main Features
1. Seal kits: From USA, durable and hard-wearing to ensure the small hydraulic cylinder a long service life.
2. Heat treatment: Quenching&Tempering which makes the piston rod super high hardness.
3. Cleaning: Ultrasonic cleaning.
4. Cutting: High precision provided by automatic roller cutting machine.
5. Testing: Ultrasonic detector, spectrograph, CMM, metallography, chrome thickness tester.
6. Advantage: Simple structure & reliable work, easy maintenance & diverse connecting ways of small hydraulic cylinder.
7. Plan: Different manufacturing plans for different customers.
8. MOQ: 10 PCS of small hydraulic cylinders
9. Lead time: 10~30 days depends on the small hydraulic cylinder quantity & whether customized.
10. Warranty: Change a new small hydraulic cylinder and we pay for the air freight in 2 years warranty time.
Packaging &Â Delivery
Mounting TypesÂ
Delivery time depends on the destination and other factors, it may up to 7Â work days.Â
In order to ensure you receive you order tax free upon import, we will declare it as a "Sample"with a lower value. This lower price does not reflect the total price you paid.Â
After we ship the goods, we will email you the shipping information, as well as tracking number. Â
WEIGHTÂ
RECOMMENDED TRANSPORT MEANSÂ
TRANSPORT TIMEÂ
COMMENTSÂ
<50kgÂ
Express-UPS/DHL/FedExÂ
Door to door serviceÂ
3-7 daysÂ
FastÂ
ConvenientÂ
ExpensiveÂ
50-150kgÂ
By airÂ
3-10 daysÂ
Fast;Â Â
Economic;Â Â
Consignee has to do customs clearanceÂ
150>kgÂ
By seaÂ
10-50 daysÂ
Slow;Â Â
Economic;Â Â
It takes some time for customs declarance and clearanceÂ
2X20' or 1X40'Â
By railÂ
20-35 daysÂ
Slow;Â Â
Economic;Â Â
It takes some time for customs declarance and clearance;Â Â
Only full container load accepted (Â MOQ: 2X20' or 1X40' )Â Â
Our Company
Betten Hydraulic-Built Cylinders to Fit Your Needs
As an experienced Hydraulic Cylinder Manufacturer, Betten Machinery is built to develop the overseas business of Boli Hydraulic & Pneumatic Technology Co., Ltd which is known as a professional manufacturer of Oil Cylinder, Pneumatic Cylinder, Hydraulic System and Related Spare Partsin East China.Â
Our factory cover an area of over 5000 square meters and have around 100 stuff including a technical team with more than 20 engineers. Our workshop equipped with over 30 sets of manufacturing and testing machines including machining center, numerical control machine, argon welding machine, plasma cutter etc. Betten has gained the certification of ISO 9001: 2008 and certification of Product Quality Supervision and Inspection Center of Wuxi City. Meanwhile, Betten also got customers' satisfaction for reasonable price, timely delivery and good after-sale service.Â
With the fast development in the past 20 years, we have gained much experience and technology in making various types of Tractor hydraulic cylinder with our expert team. Our products are widely used in equipment such as machine tool, metallurgical equipment, forging machine, kiln equipment, brick machine, plastic machine, car manufacturing machine, construction equipment for road and bridge, wielding machine, port facilities, test machine, fully auto line and we have gained a lot of world famous customer like XCMG, LIUGONG Machinery, Chalco, BOSCH, Haier, SAINT-GOBAIN, Shanghai Boiler, HTC etc.Â
Manufacturing Process
Each Betten Hydraulic RAM has suffered rigorous process and inspection to promise the good quality for our customer.Â
1). Design Services
Our design team has experience in cardan shaft relating to product design and development. If you have any needs for your new product or wish to make further improvements, we are here to offer our support.Â
2). Product Services
Raw materials → Cutting → Forging →Rough machining →Shot blasting →Heat treatment →Testing →Fashioning →Cleaning→ Assembly→Packing→Shipping
3). Samples Procedure
We could develop the sample according to your requirement and amend the sample constantly to meet your need.Â
4). Research & Development
We usually research the new needs of the market and develop the new model when there is new cars in the market.Â
5). Quality Control
Every step should be special test by Professional Staff according to the standard of ISO9001 and TS16949.Â
6). Certification
Should your products require testing and certification to comply with international standards, we can arrange this with independent, fully recognized testing companies such as SGS, Intertec, Bureau Veritas, Lloyd's Register or the testing company of your choice.Â
Hydraulic Cylinder Spare Parts
Piston Rod, seal kits, spherical plain bearing, tubes/pipes, etc.Â
FAQ
1. Are you trading company or manufacture?Â
We are a manufacture for Hydraulic Cylinders and shock absorber piston rod with more than 20 years' history.Â
2. Would you accept the production for small batches?Â
Of course, we would accept it. We also could provide the sample for you.Â
3. Hydraulic cylinder internal leakage?Â
There are 3Â main reasons causing internal leakage: Overload, polishing is not well controlled, bad seal kits. As is known to all, vehicles in China are often overload, our products all designed to bear the overload power. We have numerical control machine to assure the Polish processing.Â
4. Does your piston rod get ruptured easily?Â
Hard chrome plating quenched and tempered 45# steel for piston rod to assure sufficient hardness and toughness.Â
 Pls for free cantact Ciel liang
Tel +8615906192739
 Â
If you want to konw more about us, pls check our official website:
http://www.betten-hydraulic.com/
High Quality Compact Short Hydraulic Cylinder
Model NO.: HC389
Double-Acting Cylinder Type: Common Cylinder
Special Cylinder Type: Number of Cylinders
Combination Cylinder Type: Gas-Liquid Pressurized Cylinder
Product Name: Lightweight Compact Hydraulic Cylinder
Cylinder Case/Tube Material: Carbon Steel, Alloy Steel, Stainless Steel
Working Medium: Hydraulic Oil
Working Pressure: 5-300MPa
Available Temperature: -40ºC to + 300ºC
Maximum Stroke: Stroke Fortie-Rod Hydraulic Cylinder ≤18000mm
Honed Tube: 20-2000mm, Heat Treatment, Honing, Rolling
Piston Rod for Tie-Rod Cylinder: 10-1500mm, Tempering, Plated Nickel, Chrome
Surface Coating: Sandblasting, Primer Paint, Middle Paint, Finish P
Piston Speed: Maximum 1m/S
Trademark: OEM
Transport Package: Wooden Box
Specification: CX Compact Hydraulic Cylinder
Origin: China, Jiangsu
HS Code: 841221000
Model NO.: HC389
Double-Acting Cylinder Type: Common Cylinder
Special Cylinder Type: Number of Cylinders
Combination Cylinder Type: Gas-Liquid Pressurized Cylinder
Product Name: Lightweight Compact Hydraulic Cylinder
Cylinder Case/Tube Material: Carbon Steel, Alloy Steel, Stainless Steel
Working Medium: Hydraulic Oil
Working Pressure: 5-300MPa
Available Temperature: -40ºC to + 300ºC
Maximum Stroke: Stroke Fortie-Rod Hydraulic Cylinder ≤18000mm
Honed Tube: 20-2000mm, Heat Treatment, Honing, Rolling
Piston Rod for Tie-Rod Cylinder: 10-1500mm, Tempering, Plated Nickel, Chrome
Surface Coating: Sandblasting, Primer Paint, Middle Paint, Finish P
Piston Speed: Maximum 1m/S
Trademark: OEM
Transport Package: Wooden Box
Specification: CX Compact Hydraulic Cylinder
Origin: China, Jiangsu
HS Code: 841221000
Φ32, φ40, φ50, φ63, φ80, φ100, Â
Φ125, φ140, φ150, φ160Â
Φ32, φ40, φ50, φ63, φ80, φ100, Â
Φ125, φ140, φ150, φ160Â