Water Ring Granulating Equipment
Water ring granulating line belongs to the
concept of hot cut pelletizing method. Polymer exiting extruder passes into an
annular die. At the die face, the molten polymer will be cut by flexible blades
in air. After cutting, molten pellets are thrown into a ring of falling water.
In water the pellets are cooled and transported. The cutting, cooling and
transporting condition define different pelletizing methods and dispose unique
pelletizing equipment.
Langbo Machinery manufactures the specific
water ring pelletizing line, which combines high efficiency running and stable
productivity. Based on our mature technology and close contact with our
customer we provide not only validated pelletizing equipment but also
comprehensive solution.
Water Ring Pelletizer,Water Ring Pelletizer System,Automatic Plastic Pelletizing,Water Ring Granulating Equipment Zhangjiagang Langbo Machinery Co. Ltd. , https://www.langboextrusion.com
ISUZU Water Fire Fighting Truck:
1. Chassis
Model: ISUZU QL1070A1HWY Euro 4
Engine:
V Model: 4KH1-TCG40
V Power: 88kW
V Torque: 500N· M
Displacement: 2.999L
Wheel base: 3360mm
Driving Type: 4× 2
Min. Ground clearance: ≥ 190mm
Min. Turning diameter: ≤ 13.6m
Gross weight: 6725kg
Approach angle: ≥ 24°
Departure angle: ≥ 16°
Max. Speed: 100km/h
Front overhang/Rear overhang(mm): 1015/1525
Front wheel/Rear wheel(mm): 1504/1425
2. Cab
Four doors, 6 persons, one bench seat in the second line
3. Water Tank
Capacity: 2000kg
Material: Made by high quality steel plate, antiseptic treatment
Equipment: 1 ingate, with fast lock and open device
1 overflow safety device and air breather
1 fluid level gauge
1 drain outlet, with ball valve, stainless steel valve element
2 water filling nozzle outside of the tanker
1 inlet piping connect to water tank and pump
All technical requirements comply with GA39.4-92.
4. Fire Pump and Piping System
Model: CB10/20
Flow rate: 20 L/s
Pressure: 1.0 MPa
Mounting type: Rear-mounted
Suction pipeline, outlet pipeline, residual water pipeline and cooling water pipeline
5. PTO
Type: Sandwich type (full power PTO).
Handle: Manual control
Cooling type: Forced water cooling, Splash lubrication
6. Inner Tool Boxes and pump house
Material: The frame is Q235A;
The inside plate is aluminum alloy plate (oxidation treatment)
Structural features: Adjustable steel structure with high space utilization, convenient to take equipments.
Door: 2 rolling aluminum alloy door. Lightweight, reliable and little noise
7. Electric System
V One long line alarm lamp (located in the top of the cabin)
V Safety lights are mounted under the both sides of the truck.
V Emergency lamp and siren are with independent additional circuits.
V Control panel: Pressure, fluid level, rotate speed, etc.
