Volvo L260H wheel loader interprets efficient operation: two buckets full of one truck

Volvo Construction Equipment has proudly launched the Volvo L260H loader, the newest member of the H-Series designed for heavy-duty applications. The device weighs 34 tons and is professionally designed to be loaded with ordinary highway trucks on two occasions.

Volvo L260H Wheel Loader

Unmatched performance

Compared with the old model, data can tell everything. The Volvo L260H has a 5% increase in horsepower and torque, a 15% increase in payload, and a larger bucket size. Complemented by the revolutionary Volvo "Drive-Assist" system, "Assist Assist" function and well-designed lift arm system and stand, the Volvo L260H offers improved fuel efficiency, shorter cycle times, higher on-site productivity, and maximum Limits increase operating comfort and ease of maintenance.

Born for efficiency

The H series wheel loaders are equipped with the latest 310 kW (416 hp) Volvo D13J engine with powerful and efficient performance. Engines that meet Stage IV/Tier 4 Final emissions standards can produce 2,343 Nm (1,728 ft lbf) of high torque at lower engine speeds, minimizing emissions and fuel consumption. The passive regeneration system automatically cleans the diesel particulate filter during normal operation without any command from the operator. It also does not negatively affect performance. This generation of equipment is also equipped with an efficient cooling fan that consumes power only when necessary. The lower speed of the fan can effectively reduce the noise, improve the operating comfort and reduce the total cost of the equipment.

The improvement in fuel efficiency is mainly attributed to Volvo's patented OptiShift technology, which integrates Volvo's reverse brake (RBB) function and torque converter with locking device, which can significantly reduce fuel consumption. The RBB senses the loader's direction and applies the service brake automatically (rather than the torque converter) to reduce the speed of the machine, resulting in improved fuel efficiency, operating comfort and extended equipment life. Ideal for fast reloading and truck loading application. At the same time, the torque converter locking device can increase drive response speed, rimpull, climbing performance and fuel efficiency. Another reason for improved fuel efficiency is the use of a unique gearbox that uses the Volvo Fully Automatic Powershift (FAPS) concept. FAPS's proven ability to provide a more efficient duty cycle and shift gears based on engine speed and travel speed ensures that the loader is always operating at the best gear, reducing fuel consumption and reducing wear.

Greater lifting power

The Volvo L260H is not only one of the most efficient large wheel loaders on the market, but also one of the most productive. The new load-sensing hydraulic system powers hydraulic functions according to actual needs, which can effectively increase productivity and increase fuel efficiency by 10%, and the load and accessories are also easier to control. Unlike the old model, the Volvo L260H does not use a hydraulic pump, but uses its own gravity effect of the boom and bucket to lower the boom. This is a unique feature of the L260H.

The high-pressure hydraulic system can shorten the cycle time and increase the lift force through the lift arm system. The system can generate 295.6 kN hoisting capacity. The lift arm has been redesigned to be lighter and more robust, and can withstand 15% more payload. The L260H uses the tried and tested Z-bar linkage, which is extremely easy to shovel hard materials and can provide up to 283.7 kN. The L260H also has an unloading height of up to 3.1 m, which significantly increases the loading efficiency. In addition, the wheelbase has also been increased by 50 mm, further increasing the stability.

The Volvo L260H is available with a boom suspension system (BBS) which increases productivity by up to 20%. When working on rough terrain, BSS absorbs vibration, reduces rebound and material spillage, which not only helps to achieve faster, more comfortable work, but also extends the life of the equipment.

Full of profits

The L260H is equipped with two new buckets designed specifically for this model - the Volvo Rock Bucket and the Volvo Reprocessing Bucket. Both buckets are optimized for real-world applications, allowing the loader to operate at maximum capacity, helping users save time, money and effort. New bucket loading is faster and more efficient, increasing fuel efficiency by up to 10%.

With the 7.3 m3 Volvo reprocessing bucket, the L260H can be filled with just one truck with only two reloads. The new Volvo Rock Bucket is bigger than its predecessor model. The loading and unloading kit optimizes the loader's ability to stack, load sand, aggregate, and process materials.

Comfortable operation leads to high productivity

The L260H is built for demanding tasks and offers a high productivity and comfortable working environment. The industry-leading Volvo Care Cab features ergonomically positioned controls that provide better visibility and comfort, helping operators achieve greater efficiency and productivity. Viscous cabin base, air-suspended seat plus spacious, air-conditioned interior space, the cab effectively blocks noise and vibration. With first-rate hydraulic controls, operators can operate according to their preferences.

The cab with ROPS/FOPS protective structure has a large glass window and the construction site is at a glance. With the help of the rear-view mirror on the revolutionary Volvo "Drive-Assisted" display, you can further expand your field of vision. With the optional "Load Assist" system, the operator can gain insight into real-time operating conditions.

Main technical specifications

Locking and loading

The L260H wheel loader is easy to maintain and maintain for long periods of time. The new rack provides maintenance points that are easily maintained and distributed. As the first of its kind, the L260H is equipped with a tiltable cab that can be hydraulically controlled and maintenance personnel can stand on the ground to access the engine compartment. Equipment accumulators are located outside the BSS and are easy to maintain and repair. This combination of features not only helps the operator to perform maintenance and inspection work more efficiently, but also effectively reduces downtime and increases productivity and performance.

Volvo Construction Equipment also offers a series of aftermarket solutions that maximize uptime and help customers better control costs. Volvo genuine accessories, advanced electronic monitoring and diagnostic systems, MATRIS® software and customer support agreements are all part of many solutions. These solutions can help maximize the return on investment for Volvo L260H owners. Like all other equipment of Volvo Construction Equipment, the L260H Wheel Loader can also enjoy the professional support provided by Volvo's worldwide technical experts, repair shops and dealers. (This article comes from Volvo Construction Equipment)