Phase Detector (RTL-1000D)

Model NO.: RTL-1000D
Control: Computer Control
Weight: 180g
Power Source: AC220V
Oil Cylinder Position: Under
Clamp Lead Length: 0.5m: Meter Weight: 180g(with Battery)
Trademark: Refine
Specification: SGS
Origin: China
HS Code: 90303390

Description / Features
1. Safe and Time Saving: Traditional phase sequence measurement methods must poke the three-phase wire terminal, and connect the three bare alligator clips or test pins of phase sequence meters to the three bare firing lines, while RTL-1000D uses clamp non-contact measurement, without taking off the wire and no need to contact high-voltage bare fire-wire, the test can be made by directly clamping the three-phase insulating sheath by three super-sensitive high-insulated clamps. Conducting measurement on sheathed cable significantly improves the safety of field testing, effectively protect the operator's personal safety and increase productivity!

2. Convenient Operation: Instrument base plate is provided with magnet, instrument can adsorbed on the metal shell when testing, the operation more convenient.

3. Multi-Purpose In addition to phase sequence detection, it also has the functions of live wire examination, simple power detection, fire-wire identification, phase deficiency determination, break location detection, DC line break and line maintenance, equivalent to 3 induction electric pens.  

4. Dynamic Display LED dynamic display, intuitive and clear

5. Sensitive and reliable More sensitive RTL-1000D clamp, can even sense the AC voltage signal as low as a few Volts, with a wider range of live electricity.

6. Beautiful and scientific The three clamps of RTL-1000D are in three colors, Red, Yellow and Green; It is more in line with the distinction of three-phase line, and more scientific and artistic overall appearance.

6. Ultra-low Power Consumption RTL-1000D has a better power-saving performance with the maximum rated power of 100mVA.


Model RTL-1000D
Functions Phase detection (normal phase, reverse phase and phase deficiency), Live wire examination, Simple Power detection, Breakpoint location and Line maintenance.  
Power Supply DC3V AA Mn batteries (R6P) ×2 PCS, Continuously working for 200 hours
AC Voltage Range(V) AC0~600V, 40~70Hz (Sine Wave Continuous Input)
Clamp Wire Size Diameter ø10-ø40mm
LED Display Positive Phase Sequence
The four phase-sequence lamps blink in order (clockwise).
Negative Phase Sequence
The four phase-sequence lamps blink in order (counterclockwise).
Line-voltage IndicationL1,L2,L3  lamp light up.
Default PhaseL1/L2/L3  lamp is off.
Open CircuitL1/L2/L3  lamp is off.
Power On Indication Power On indication light turns on
Auto Power off  After 5minutes, the meter automatically cut off power supply.
Meter Dimension Width, height, thickness 70mm*75mm*30mm
Clamp Lead Length 0.5m
Meter Weight 180g (with battery)
Working Temperature and Humidity -10ºC~55ºC; below 80%rh
Storage Temperature and Humidity -20ºC~60ºC; below 90%rh
Maximum Measured Voltage AC600V
Dielectric Strength 5.4kVrms
Maximum rated Power 100mVA
Safety Provisions EN61010-1: 2001, EN61010-031: 2002, Pollution level 2, CAT III(600V), Transient over-voltage 6000V
Accessories  Meter: 1 Piece; Carrying case; 1 Piece.

Impact Sand Making Machine

New sand making machine (vertical shaft Impact Crusher) is suitable for crushing soft or medium hard and very hard ore materials whose hardness is not higher than 320Pa. Sand making machine is widely used in large, smelting, building materials, highway, railway, water conservancy and chemical industry and many other departments.

Impact Sand Making Machine,Vertical Shaft Impact Sand Making Machine,Reversible Sand Making Machine,Impact Silica Sand Making Machine

Hebei Ladery Import & Export Co., Ltd. , https://www.ladery.com