PS/ GPPS Diffusion Sheet Board Panel Extrusion Machine

PART 1 INTRODUCTION:

This line is specially used for producing PMMA/PC/PS single layer or multi-layer sheet or plate, suitable in the fields of packaging, stationery, chemicals, construction, household appliances and so on.

 

 

PART 2: SHEET SPCIFICATIONS:

1. Usual sheet width: 500, 600, 700, 900, 1020, 1200, 1300, 1400, 1500, 1700, 1800, 2100, 2200mm.

2.  Usual sheet thickness: 0.2-2.0mm, 0.5-2mm, 1.5-10mm, 6-20mm, 3-30mm.

 

PART 3: FEATURES OF THIS LINE

1. Extruder:

Special screw structure, imported world-known thermocontrollers, electronics, hard gear face reducers to ensure high effective material extrusion capacity.
With the Melt Pump and Hydraulic screen changer.

2.T -type die head:

suitable compression ratio to ensure uniform flow stability.

3. Three-roller calendar:

According to the material properties, adopting vertical three-roller, oblique three-roller, horizontal three-roller calendar. Internal roller temperature control using a unique flow channel, so that the stability of uniform distribution roller. The independent oil temperature control for three roller to ensure more stable and exact control.

4. Cooling frame:

According to product specifications, configurations with different specifications of the stainless steel cooling roller 
5. Edge-cutting devices:

Trimming can be divided into manual and automatic, three-dimensional configuration tool adjustment device, width adjustable. 
6. Cut off machine:

Saw cutting or knife cutting, thin type and non-friable type sheet generally usually knife cut, adopted high-quality alloy cutting tools, sharp and durable.

9. Contact: 
Cherie Mao;+8617561657206

PART 1 INTRODUCTION:

This line is specially used for producing PMMA/PC/PS single layer or multi-layer sheet or plate, suitable in the fields of packaging, stationery, chemicals, construction, household appliances and so on.

 

 

PART 2: SHEET SPCIFICATIONS:

1. Usual sheet width: 500, 600, 700, 900, 1020, 1200, 1300, 1400, 1500, 1700, 1800, 2100, 2200mm.

2.  Usual sheet thickness: 0.2-2.0mm, 0.5-2mm, 1.5-10mm, 6-20mm, 3-30mm.

 

PART 3: FEATURES OF THIS LINE

1. Extruder:

Special screw structure, imported world-known thermocontrollers, electronics, hard gear face reducers to ensure high effective material extrusion capacity.
With the Melt Pump and Hydraulic screen changer.

2.T -type die head:

suitable compression ratio to ensure uniform flow stability.

3. Three-roller calendar:

According to the material properties, adopting vertical three-roller, oblique three-roller, horizontal three-roller calendar. Internal roller temperature control using a unique flow channel, so that the stability of uniform distribution roller. The independent oil temperature control for three roller to ensure more stable and exact control.

4. Cooling frame:

According to product specifications, configurations with different specifications of the stainless steel cooling roller 
5. Edge-cutting devices:

Trimming can be divided into manual and automatic, three-dimensional configuration tool adjustment device, width adjustable. 
6. Cut off machine:

Saw cutting or knife cutting, thin type and non-friable type sheet generally usually knife cut, adopted high-quality alloy cutting tools, sharp and durable.

9. Contact: 
Cherie Mao;+8617561657206

Petrochemical Industry

centrifugal casting furance tube,fired heater, Petrochemical Heating Furnace, reformer tube, catalyst tube

Tuopu Industry(Jiangsu) Co., Ltd. , https://www.tuopu-industry.com