Professional manufacturer is located in China, our products include Galvanized Steel Strand,Galvanized Steel Cable, including 1x19 7x7 7x19 and so on. the diameter is min. 0.8mm, max. 12mm.
Galvanized steel wire ropes are made of fine Carbon Steel Wire , There are Hot dip galvanized and Electric Galvanized wire rope, The galvanized wire ropes have higher tensile strength and better oxidation resistance than ungalvanized.
construction : 7x7,6x7+fc,6x7+iws,6x19+IWS,6x19+FC,7x19, 1x19 and so on.
diameter: from 1.0mm to 12mm.
type : hot dip galvanized steel cable and electric galvanized steel cable.
tensile strength : 1770N/mm2, 1960N/mm2,2160N/mm2.
We follow very strict incoming and outgoing QC procedures and have our own in-house inspection equipment, such as Spectrometers, Load testing machines, salt spray booth, along with being ISO9001 certified.
Please do not confuse Ruijin Co.ltd with other Chinese manufacturers, we strive to offer the very best quality product along with unparalleled customer service. We would welcome the opportunity to discuss your current and future requirements, and warmly invite you to visit our facility.
7X19 Galvanized Steel Cable,7X19 Steel Wire Rope,7X19 Dia.2Mm Galvanized Steel Cable,7X19 Dia.2Mm Galvanized Steel Wire Rope JIANGSU RUIJIN SLING CO.,LTD. , https://www.cnsteelcable.com
Brief Introduction:
End carriage also called end beam or end truck. It is a necessary actuating device to be used for single or double girder bridge crane (overhead crane).
About capacity: Normally from 1T to 10T. For special customer, we manufacture from the minimum capacity to the maximum capacity. How big you need, how big we make for you.
About gear diameter: we have our standard and normal ones for your selection. But we also do custom-made for you especially according to your bridge crane specification.
About motor quality: For meeting different customers demand, we specially manufacture two kinds of motor for our end truck. One is standard conical lifting motor which is manufactured by the most famous China motor factory "Nanjing Special Motor Factory", the other one is the new safety motor "Softer Start motor" which is popular for most of customers nowadays.
About span: As there are various usage environments for the bridge crane, the span would be different .If span is too large, maybe the end truck cannot support such capacity. How to find a solution? We will do custom made overall considering your capacity and span or other specification.
About travelling speed: normally over 17m/min. Different motor, different speed.
Just as a good car gives your years of trouble free service, our end carriages will transport your overhead cranes in a manner that maximizes crane life and minimizes the cost of operation and maintenance.
We custom design our end trucks to meet your specific needs:
-the steel structure is a torsion resistant box girder prepared to be connected to the crane girder.
-Rigid special end carriage-girder connections and forged wheel design ensure years of low maintenance operation.
-Quick disconnection electrical plugs and a power lock wheel assembly providing a easy inspection and service.
-High grade rubber bumpers are bolted on for energy absorbing, allowing easy removal for replacement or maintenance
- Three stage motor-gearboxes, travel wheels with double flanged with mounted bearings, drive to the wheels is direct via splined shaft.
Structure &Â Â Technical Data:
Technical Data:
Â
Model
Crane specification
End carriage size (W*H*Thickness*L)
Width of the connecting plate
Wheel dia*Wheel race width
Motor power
L120-20
1t/5.5m-11.5m
150*150*6*2000
500mm
120*60
0.3kw
L120-25
1t/12m-16.5m
150*150*6*2500
500mm
120*64
0.3kw
L160-20
2t3t/5.5m-11.5m
150*250*6*2000
500mm
174*64
0.3kw
L160-25
2t3t/12m-16.5m
150*250*6*2500
550mm
174*64
0.4kw
L160-30
2t3t/17m-22.5m
150*250*6*3000
600mm
174*64
0.4kw
L200-20
5t/5.5m-11.5m
150*250*6*2000
600mm
198*64
0.4kw
L200-25
5t/12m-16.5m
200*250*6*2500
600mm
198*64
0.4kw
L200-30
5t/17m-22.5m
200*250*6*3000
650mm
198*64
0.75kw
L240-20
10t/5.5m-11.5m
200*250*6*2000
650mm
240*70
0.75kw
L240-25
10t/12m-16.5m
200*300*6*2500
650mm
240*70
0.75kw
L240-30
10t/17m-22.5m
200*300*6*3000
650mm
240*70
1.0kw
L240-35
5t/23m-28.5m
200*300*6*3500
650mm
200*64
0.75kw
L268-25PA
16t/5.5m-16.5m
200*300*8*2500
700mm
268*90
1.1kw
L268-30PA
16t/17m-22.5m
200*300*8*3000
750mm
268*90
1.1kw
L268-35
10t/23m-28.5m
200*300*8*3500
700mm
240*70
1.1kw
L268-25PB
20t/5.5m-16.5m
200*350*8*2500
900mm
268*90
1.5kw
L268-30PB
20t/17m-22.5m
200*350*8*3000
950mm
268*90
1.5kw
Packaging &Â Shipping:
Not only the End Carriage of crane, but the other spare parts of cranes, we can also provide to you. If you need my help, just contact to me.
Any inquiry, please feel free to contact us!
Contact Information:
Â
Amy Guo Xinxiang Anlian Crane Construction Machinery Co., Ltd. Add: Industrial Zone, Weizhuang Hanliao District, Changyuan County,Â
        Xinxiang City, Henan Province, China.
M: 0086-15893228602
T: 0086-15346314998
F: 0086-0373-8928928Â Â Â W:Â http://alqz.en.alibaba.com
Brief Introduction:
End carriage also called end beam or end truck. It is a necessary actuating device to be used for single or double girder bridge crane (overhead crane).
About capacity: Normally from 1T to 10T. For special customer, we manufacture from the minimum capacity to the maximum capacity. How big you need, how big we make for you.
About gear diameter: we have our standard and normal ones for your selection. But we also do custom-made for you especially according to your bridge crane specification.
About motor quality: For meeting different customers demand, we specially manufacture two kinds of motor for our end truck. One is standard conical lifting motor which is manufactured by the most famous China motor factory "Nanjing Special Motor Factory", the other one is the new safety motor "Softer Start motor" which is popular for most of customers nowadays.
About span: As there are various usage environments for the bridge crane, the span would be different .If span is too large, maybe the end truck cannot support such capacity. How to find a solution? We will do custom made overall considering your capacity and span or other specification.
About travelling speed: normally over 17m/min. Different motor, different speed.
Just as a good car gives your years of trouble free service, our end carriages will transport your overhead cranes in a manner that maximizes crane life and minimizes the cost of operation and maintenance.
We custom design our end trucks to meet your specific needs:
-the steel structure is a torsion resistant box girder prepared to be connected to the crane girder.
-Rigid special end carriage-girder connections and forged wheel design ensure years of low maintenance operation.
-Quick disconnection electrical plugs and a power lock wheel assembly providing a easy inspection and service.
-High grade rubber bumpers are bolted on for energy absorbing, allowing easy removal for replacement or maintenance
- Three stage motor-gearboxes, travel wheels with double flanged with mounted bearings, drive to the wheels is direct via splined shaft.
Structure &Â Â Technical Data:
Technical Data:
Â
Model
Crane specification
End carriage size (W*H*Thickness*L)
Width of the connecting plate
Wheel dia*Wheel race width
Motor power
L120-20
1t/5.5m-11.5m
150*150*6*2000
500mm
120*60
0.3kw
L120-25
1t/12m-16.5m
150*150*6*2500
500mm
120*64
0.3kw
L160-20
2t3t/5.5m-11.5m
150*250*6*2000
500mm
174*64
0.3kw
L160-25
2t3t/12m-16.5m
150*250*6*2500
550mm
174*64
0.4kw
L160-30
2t3t/17m-22.5m
150*250*6*3000
600mm
174*64
0.4kw
L200-20
5t/5.5m-11.5m
150*250*6*2000
600mm
198*64
0.4kw
L200-25
5t/12m-16.5m
200*250*6*2500
600mm
198*64
0.4kw
L200-30
5t/17m-22.5m
200*250*6*3000
650mm
198*64
0.75kw
L240-20
10t/5.5m-11.5m
200*250*6*2000
650mm
240*70
0.75kw
L240-25
10t/12m-16.5m
200*300*6*2500
650mm
240*70
0.75kw
L240-30
10t/17m-22.5m
200*300*6*3000
650mm
240*70
1.0kw
L240-35
5t/23m-28.5m
200*300*6*3500
650mm
200*64
0.75kw
L268-25PA
16t/5.5m-16.5m
200*300*8*2500
700mm
268*90
1.1kw
L268-30PA
16t/17m-22.5m
200*300*8*3000
750mm
268*90
1.1kw
L268-35
10t/23m-28.5m
200*300*8*3500
700mm
240*70
1.1kw
L268-25PB
20t/5.5m-16.5m
200*350*8*2500
900mm
268*90
1.5kw
L268-30PB
20t/17m-22.5m
200*350*8*3000
950mm
268*90
1.5kw
Packaging &Â Shipping:
Not only the End Carriage of crane, but the other spare parts of cranes, we can also provide to you. If you need my help, just contact to me.
Any inquiry, please feel free to contact us!
Contact Information:
Â
Amy Guo Xinxiang Anlian Crane Construction Machinery Co., Ltd. Add: Industrial Zone, Weizhuang Hanliao District, Changyuan County,Â
        Xinxiang City, Henan Province, China.
M: 0086-15893228602
T: 0086-15346314998
F: 0086-0373-8928928Â Â Â W:Â http://alqz.en.alibaba.com
Single Girder Overhead Crane End Carriage 5t End Truck
Model NO.: 5T
Span: 1m-33m
Feature: Overhead Crane End Carriage
Girder Structure: Rigid Box Type
Product Name: Crane End Carriage
Working System: A3-A5
Max. Lifting Height: 6~30m
Wheels: Double Flanged Wheels
Warranty: 1 Year
Application: Construction Usage, Workshop Usage, Container Usage, Mineral Area Usage
Sling Type: Wire Rope
Power Source: Electric
Moving Type: Wheel
Installation: Assembled
Tower Crane Type: Bridge Crane
Trademark: Anlian
Transport Package: Paper Box and Wooden Case
Specification: CCC, ISO9001
Origin: Xinxiang, He′nan, China
HS Code: 8431499900
Model NO.: 5T
Span: 1m-33m
Feature: Overhead Crane End Carriage
Girder Structure: Rigid Box Type
Product Name: Crane End Carriage
Working System: A3-A5
Max. Lifting Height: 6~30m
Wheels: Double Flanged Wheels
Warranty: 1 Year
Application: Construction Usage, Workshop Usage, Container Usage, Mineral Area Usage
Sling Type: Wire Rope
Power Source: Electric
Moving Type: Wheel
Installation: Assembled
Tower Crane Type: Bridge Crane
Trademark: Anlian
Transport Package: Paper Box and Wooden Case
Specification: CCC, ISO9001
Origin: Xinxiang, He′nan, China
HS Code: 8431499900
single girder overhead crane end carriage 5t end truck