Nox Sensor 24V for DAF car, auto parts DAF Automobile 24V nitrogen and Oxygen Sensor is suitable for DAF tail gas treatment. Nitrogen and oxygen sensor is one of the key components of SCR post-treatment system. It is used to measure the concentration of nitrogen and oxygen in engine exhaust to meet the needs of closed-loop control of engine aftertreatment system and on-board OBD diagnostic system. It can be applied to gas engine or diesel engine. Its structure includes ceramic probe, cable and processing chip controller, which is connected with ECU through can communication. The effects of nitrogen and oxygen sensor damage are as follows: 1. If the nitrogen and oxygen sensor is damaged, the diesel control system is in an open-loop state, that is, the emission data cannot be accurately fed back, and the engine control unit cannot accurately adjust the emission. At this time, the vehicle's emission must exceed the standard. If it always exceeds the standard, the service life of tail gas emission treatment equipment will be shortened. 2. Because it is a key component for measuring the excessive exhaust of diesel vehicles. If it is damaged or works poorly, it will directly cause multiple fault lights of the engine to turn on. At the same time, there will be relevant fault storage records in the control unit. 3. The damage of nitrogen and oxygen sensor will lead to the disorder of diesel combustion control, resulting in weak acceleration, idle jitter, unable to start and so on,. Once a problem occurs, the nitrogen and oxygen sensor needs to be replaced in time. It is usually installed at the rear end of the catalyst in the exhaust pipe. Nox Sensor 24V For DAF Car,Daf Auto Parts 24V Nitrogen Oxygen Sensor,Daf Automobile 24V Nitrogen Oxygen Senso,Daf Engine Parts 24V Nitrogen Oxygen Sensor Ruian OKOOO Electronic Technology Co., LTD , https://www.okoosensor.com
Sample service
We provide free sample for confirmation and customer bears the freight charges
OEM service
Having our own factory and professional technicians,we welcome OEM orders as well.We can design and produce the specific product you need according to your detail information
After-sale Service
Our enthusiastic and friendly customer service representatives are ready to assist with any questions or problems
Item
Spur Gear Axle ShaftÂ
Material
4140,4340,40Cr,42Crmo,42Crmo4
OEM NO
Customize
Certification
ISO/TS16949
Test Requirement
Magnetic Powder Test, Hardness Test, Dimension Test
Color
Paint , Natural Finish ,Machining All Around
Material
Aluminum: 5000series(5052...)/6000series(6061…)/7000series(7075…)
Steel: Carbon Steel,Middle Steel,Steel Alloy,etc. Stainess Steel: 303/304/316,etc. Copper/Brass/Bronze/Red Copper,etc. Plastic:ABS,PP,PC,Nylon,Delrin(POM),Bakelite,etc.
Size
According to Customer's drawing or samples
Process
CNC machining,Turning,Milling,Stamping,Grinding,Welding,Wire Injection,Cutting,etc.
Tolerance
≥+/-0.03mm
Surface Treatment
(Sandblast)&(Hard)&(Color)Anodizing,(Chrome,Nickel,Zinc…)Plating,Painting,Powder Coating,Polishing,Blackened,Hardened,Lasering,Engraving,etc.
File Formats
ProE,SolidWorks,UG,CAD,PDF(IGS,X-T,STP,STL)
Sample
Available
Packing
Spline protect cover ,Wood box ,Waterproof membrane; Or per customers'Â requirements.
Sample service
We provide free sample for confirmation and customer bears the freight charges
OEM service
Having our own factory and professional technicians,we welcome OEM orders as well.We can design and produce the specific product you need according to your detail information
After-sale Service
Our enthusiastic and friendly customer service representatives are ready to assist with any questions or problems
Item
Spur Gear Axle ShaftÂ
Material
4140,4340,40Cr,42Crmo,42Crmo4
OEM NO
Customize
Certification
ISO/TS16949
Test Requirement
Magnetic Powder Test, Hardness Test, Dimension Test
Color
Paint , Natural Finish ,Machining All Around
Material
Aluminum: 5000series(5052...)/6000series(6061…)/7000series(7075…)
Steel: Carbon Steel,Middle Steel,Steel Alloy,etc. Stainess Steel: 303/304/316,etc. Copper/Brass/Bronze/Red Copper,etc. Plastic:ABS,PP,PC,Nylon,Delrin(POM),Bakelite,etc.
Size
According to Customer's drawing or samples
Process
CNC machining,Turning,Milling,Stamping,Grinding,Welding,Wire Injection,Cutting,etc.
Tolerance
≥+/-0.03mm
Surface Treatment
(Sandblast)&(Hard)&(Color)Anodizing,(Chrome,Nickel,Zinc…)Plating,Painting,Powder Coating,Polishing,Blackened,Hardened,Lasering,Engraving,etc.
File Formats
ProE,SolidWorks,UG,CAD,PDF(IGS,X-T,STP,STL)
Sample
Available
Packing
Spline protect cover ,Wood box ,Waterproof membrane; Or per customers'Â requirements.
Transmission Spline Propeller Gear Shaft Agricultural Tool
Model NO.: Rice transplanter
Sample Service: Free
Lester Nos: 6468, 6469
Trademark: THALIA
Transport Package: Neutral Packing and Wood Pallet
Origin: Changzhou
HS Code: 85119090
Model NO.: Rice transplanter
Sample Service: Free
Lester Nos: 6468, 6469
Trademark: THALIA
Transport Package: Neutral Packing and Wood Pallet
Origin: Changzhou
HS Code: 85119090