Elevator chain products have high requirements on wearing resistance and tensile strength. For this purpose, we carry out secondary heat treatment for the rollers and bushings. The two chain components are firstly carburized, and then undergo secondary heat treatment to offer increased surface hardness and core part toughness. These processes ensure improved crushing strength. As this range of roller chain is primarily used for material lifting in vertical direction, there is a high requirement on its framework firmness so as to prevent the chain getting loosening up. To meet this requirement, we manufacture the product parts with optimized allowance to ensure prefect match, and meanwhile, a hydraulic press is applied to assemble the chain components. Our elevator chain is commonly used in cement, mining, grain processing, road construction, and steelworks industries. It assists material elevating, and is accommodate to severe working environments. It works normally even if it is attached with heavy dust and hard particles. Elevator chain products have high requirements on wearing resistance and tensile strength. For this purpose, we carry out secondary heat treatment for the rollers and bushings. The two chain components are firstly carburized, and then undergo secondary heat treatment to offer increased surface hardness and core part toughness. These processes ensure improved crushing strength. As this range of roller chain is primarily used for material lifting in vertical direction, there is a high requirement on its framework firmness so as to prevent the chain getting loosening up. To meet this requirement, we manufacture the product parts with optimized allowance to ensure prefect match, and meanwhile, a hydraulic press is applied to assemble the chain components. Our elevator chain is commonly used in cement, mining, grain processing, road construction, and steelworks industries. It assists material elevating, and is accommodate to severe working environments. It works normally even if it is attached with heavy dust and hard particles. China Heavy Fork,Forge Fork supplier & manufacturer, offer low price, high quality Forging Forklift Forks We can foege it in any size you want, etc. Heavy Fork,Forge Fork,Forging Forklift Forks,Heavy Forged Forklift Forks Shandong Techence Forging Co.,Ltd , https://www.shandongtechence.comElevator Chain
Bucket Elevator Chain
Bucket Lifter Chain
Chain type includes NE series, NSE series, NP series, and so on.Â
Chain No.
Pitch P (mm)
Diameter of roller d1 (mm)
Diameter of pin d2 (mm)
Length of pin b2 (mm)
Inner width of inner link b1(min) (mm)
Thickness of sidebar T (mm)
Height of sidebar h2 (mm)
Height of attached plate h2 (mm)
Tensile strength Q (min.)(KN)
NE model lifting chain for elevators
NE15-101.6
101.6
26.5
11.5
70
27
6
35
35
128.1
NE30-152.4
152.4
35
15.5
90
36.5
8
50
50
245
NE50-152.4
152.4
35
15.5
90
36.5
8
50
110
245
NE100-200
200
42
19.1
120
51.8
10
60
125
375
NE150-200
200
48.5
22.23
120
57.8
10
60
125
375
NE300-250
250
70
35
165
75
16
100
150
450
NE300-250A
250
63.5
31.75
146
67.4
12
90
150
450
NP152.4
152.4
357
15.88
88
38
7.9
45
105
245
FE12600
152.4
35
15.88
86
36.5
7.9
45
120
245
NE100/2L
200
44.5
19.05
114
53
10
60
125
400
NE150-B/2L
200
44.5
19.05
114
53
10
60
125
400
NE200/2L
250
63.5
31.75
140
67.4
12
90
150
750
9060 G4/4L
152.4
34.93
19.05
94.5
38.1
9.5
50.8
120
312
P152.4-A/2L
152.4
36
17.33
85
36.5
8
50
105
160
DK 19200M G4/2L
200
38.1
15.77
86
36.5
8
45
125
312
NE150-A/2L
200
48.5
22.23
122
57.6
10
75
125
529
P152.4 3L
152.4
31.75
15.77
109
54
9.6
38.1
139.7
145
P125/2L
125
52
17
80
31
8
580
100
219.52
FE12600-S/2L
152.4
34.93
15.88
86
36.5
7.9
45
120
160
NE150/2L
200
48.5
22.23
118
57.6
10
75
125
529
NE300-250/2L
250
70
35
165
75
16
100
150
1107
P152.4/2L
152.4
35.7
15.88
88
38
7.9
45
105
160
DS17200-S G4/2L
200
40.08
19.05
106.5
50.8
9.5
50.8
130
260
P250-G4/2L
250
73
38.5
183.5
82
16
115
180
1200
NE300
250
70
35
165
75
16
100
150
1107
Â
Chain No.
Pitch P (mm)
Diameter of roller d1 (mm)
Diameter of pin d2 (mm)
Length of pin L (mm)
Inner width of inner link b1 (mm)
Thickness of sidebar T (mm)
Height of sidebar h2 (mm)
Height of attachment h2 (mm)
Tensile strength Q (min.)(KN)
NP150
150
31.8
14.17
69
30
6.35
38.1
105
200
NP228.6
228.6
62
24.2
136
64
13
70
70
440
Chain No.
Pitch P (mm)
Inner width of inner link W (mm)
Diameter of roller D (mm)
Sidebar
Pin
Dimension of attachment
Tensile strength(KN)
Height H (mm)
Thickness T (mm)
Diameter d (mm)
Length L (mm)
H2 (mm)
N (mm)
X (mm)
Y (mm)
NSE200
100
51.8
44.5
60
10
19.1
111.5
150
18
100
105
420
NSE300
100
57.6
48.5
75
7.5
22.23
120
150
18
100
105
520
NSE400
125
67.4
63.5
90
12
31.75
139.3
180
18
125
130
735
NSE500-1
125
75
70
100
16
35
170
180
18
125
130
980
NSE500-2
125
75
71.5
102
16
36
165
180
18
125
130
1200
NSE600H
125
75
75
105
16
40
165
185
18
125
136
1260
NSE700
150
85
85
125
16
48
180
226
22
150
165
1470
Why Choose DCC?Â
1.Changzhou Dongwu chain transmission manufacturing co.,Ltd is a professional manufacture of chains,and is the member unit of China National technical committee for standardization for china transmission,
2.we occupied an area over 100 thousand sqm,owned standard workshops over 30 thousands sqm and over 300sets of professional equipments to produce chains in large-scale as well as complete inspection and test devices.
3.we passed through the authentications of ISO9001:2000 international quality system and ISO14001 environmental management system .
4,we have 75% of products which are exported to Europe,America,Japan , Southeast Asia ,and so on,
5.More than 10years factory experience ,Nearly all the parts are produced by our own factory,therefor we can control the cost and quality.
Choose DCC,you choosed High quality , competitive price,perfect service,
wish we will promote business as well as friendship!
Â
Elevator Chain
Bucket Elevator Chain
Bucket Lifter Chain
Chain type includes NE series, NSE series, NP series, and so on.Â
Chain No.
Pitch P (mm)
Diameter of roller d1 (mm)
Diameter of pin d2 (mm)
Length of pin b2 (mm)
Inner width of inner link b1(min) (mm)
Thickness of sidebar T (mm)
Height of sidebar h2 (mm)
Height of attached plate h2 (mm)
Tensile strength Q (min.)(KN)
NE model lifting chain for elevators
NE15-101.6
101.6
26.5
11.5
70
27
6
35
35
128.1
NE30-152.4
152.4
35
15.5
90
36.5
8
50
50
245
NE50-152.4
152.4
35
15.5
90
36.5
8
50
110
245
NE100-200
200
42
19.1
120
51.8
10
60
125
375
NE150-200
200
48.5
22.23
120
57.8
10
60
125
375
NE300-250
250
70
35
165
75
16
100
150
450
NE300-250A
250
63.5
31.75
146
67.4
12
90
150
450
NP152.4
152.4
357
15.88
88
38
7.9
45
105
245
FE12600
152.4
35
15.88
86
36.5
7.9
45
120
245
NE100/2L
200
44.5
19.05
114
53
10
60
125
400
NE150-B/2L
200
44.5
19.05
114
53
10
60
125
400
NE200/2L
250
63.5
31.75
140
67.4
12
90
150
750
9060 G4/4L
152.4
34.93
19.05
94.5
38.1
9.5
50.8
120
312
P152.4-A/2L
152.4
36
17.33
85
36.5
8
50
105
160
DK 19200M G4/2L
200
38.1
15.77
86
36.5
8
45
125
312
NE150-A/2L
200
48.5
22.23
122
57.6
10
75
125
529
P152.4 3L
152.4
31.75
15.77
109
54
9.6
38.1
139.7
145
P125/2L
125
52
17
80
31
8
580
100
219.52
FE12600-S/2L
152.4
34.93
15.88
86
36.5
7.9
45
120
160
NE150/2L
200
48.5
22.23
118
57.6
10
75
125
529
NE300-250/2L
250
70
35
165
75
16
100
150
1107
P152.4/2L
152.4
35.7
15.88
88
38
7.9
45
105
160
DS17200-S G4/2L
200
40.08
19.05
106.5
50.8
9.5
50.8
130
260
P250-G4/2L
250
73
38.5
183.5
82
16
115
180
1200
NE300
250
70
35
165
75
16
100
150
1107
Â
Chain No.
Pitch P (mm)
Diameter of roller d1 (mm)
Diameter of pin d2 (mm)
Length of pin L (mm)
Inner width of inner link b1 (mm)
Thickness of sidebar T (mm)
Height of sidebar h2 (mm)
Height of attachment h2 (mm)
Tensile strength Q (min.)(KN)
NP150
150
31.8
14.17
69
30
6.35
38.1
105
200
NP228.6
228.6
62
24.2
136
64
13
70
70
440
Chain No.
Pitch P (mm)
Inner width of inner link W (mm)
Diameter of roller D (mm)
Sidebar
Pin
Dimension of attachment
Tensile strength(KN)
Height H (mm)
Thickness T (mm)
Diameter d (mm)
Length L (mm)
H2 (mm)
N (mm)
X (mm)
Y (mm)
NSE200
100
51.8
44.5
60
10
19.1
111.5
150
18
100
105
420
NSE300
100
57.6
48.5
75
7.5
22.23
120
150
18
100
105
520
NSE400
125
67.4
63.5
90
12
31.75
139.3
180
18
125
130
735
NSE500-1
125
75
70
100
16
35
170
180
18
125
130
980
NSE500-2
125
75
71.5
102
16
36
165
180
18
125
130
1200
NSE600H
125
75
75
105
16
40
165
185
18
125
136
1260
NSE700
150
85
85
125
16
48
180
226
22
150
165
1470
Why Choose DCC?Â
1.Changzhou Dongwu chain transmission manufacturing co.,Ltd is a professional manufacture of chains,and is the member unit of China National technical committee for standardization for china transmission,
2.we occupied an area over 100 thousand sqm,owned standard workshops over 30 thousands sqm and over 300sets of professional equipments to produce chains in large-scale as well as complete inspection and test devices.
3.we passed through the authentications of ISO9001:2000 international quality system and ISO14001 environmental management system .
4,we have 75% of products which are exported to Europe,America,Japan , Southeast Asia ,and so on,
5.More than 10years factory experience ,Nearly all the parts are produced by our own factory,therefor we can control the cost and quality.
Choose DCC,you choosed High quality , competitive price,perfect service,
wish we will promote business as well as friendship!
Â
Steel Elevator Industry Roller Conveyor Chain
Model NO.: NE15-101.6 and so on
Delivery: 45 Days
Standards: Approved Drawings
Samples: Free
Structure (for Chain): Roller Chain
Trademark: DCC/ CUSTOMER BRAND
Specification: ISO, SGS
Origin: China
HS Code: 7315890000
Model NO.: NE15-101.6 and so on
Delivery: 45 Days
Standards: Approved Drawings
Samples: Free
Structure (for Chain): Roller Chain
Trademark: DCC/ CUSTOMER BRAND
Specification: ISO, SGS
Origin: China
HS Code: 7315890000