Rear Drive Axle Series,Auto Rear Drive Axle,Truck Rear Drive Axle,Isuzu Rear Drive Axle FUZHOU RICHLUX TRADING CO.,LTD , https://www.richautoparts.com
Flat roof structure for support.
The concentricity of shafts at both ends controlled in 15μm.
Patent no. of the sealing way of internal vacuum pipe: 200720001166.0.
The mounting bases of the motor and the speed reducer equipped with an adjustable structure.
Notes:
Different types of butterfly valve, such as rigidity seal and non-wear butterfly valve.
Application:
This dryer is suitable for granules & powders to be vacuum dried & mixed in pharmaceutical, foodstuff, chemical & other industrial lines. Especially suitable for the following requirements of the material:
1. The material unable to accept the high temperature.
2. The material is easily oxidized & dangerous.
3. The material needs to recycle the solvents and toxic gases.
4. The material requires a very low residual volatile matter content.
5. The material requires fully & uniformly mixing.
Technical Data:
Name
Unit
Model
Model
GSZG-Â 100
GSZG- 200
GSZG- 300
GSZG- 500
GSZG- 800
GSZG- 1000
GSZG- 2000
GSZG- 3000
GSZG- 4000
GSZG- 5000
Total Volume
L
100
200
300
500
800
1000
2000
3000
4000
5000
Working Volume
L
50
100
150
250
400
500
1000
1500
2000
2500
Heating Area
M2
1.16
1.5
2
2.63
3.5
4.61
7.5
10.2
12.1
14.1
Rotating Speed
Rpm
6
5
4
4
4
Power
KW
1.5
2.2
2.2
3
4
4/5.5
5.5
7.5
11
15
Overall Size
Mm
1800×720×1500
2000×800×1900
2200×900×2100
2500×1000×2400
2700×1200×3200
2800×1300×3200
3200×1800×3500
3800×2000×3600
4200×2200×4000
4350×2450×4950
Weight
Kg
825
1050
1350
1650
1800
2070
3000
4500
5350
6000
Design Pressure inside the Cylinder
Mpa
-0.09~0.096
Design pressure of Jacket
Mpa
0.3
The adjustable speed motor is optional according to buyer's requirement. Its speed is 0-6 rpm.                                                                   The maximal volume of cylinder can be designed to 10000L 
Company Profile:
Changzhou Aokai Drying Equipment Co., Ltd. was established in 2004, and is specialized in the design, manufacturing and development of the drying, calcination, cooling, crushing, mixing and granulating equipment.Â
The company has 4 modern standard workshops, about 13600 m2. There are 15 mid-level and senior engineers. It has more than 80 sets of processing devices and its annual production capacity can be more than 500 sets with over 30 categories. The company can provide dryer, solutions and service according to GMP, cGMP and FDA certification.
The company has obtained the certification of "National High-Tech Enterprise", been the member of China Pharmaceutical Equipment Industry Association. Also, the company has passed ISO9001:2008 Quality Management System Certification, ISO14001:2004 Environmental Management System Certification and many other certificates as well as 20 more core technologies getting patent certificates.
For a long time, the company focuses on the scientific and technological innovation, always persists in the technology upgrading as the core, and takes the optimizing of the product structure as the development direction. The company has a professional technical team to cooperate with some scientific and research institutes to develop new products, absorbs and digests advanced technologies from China and overseas, continues to explore various patent technologies to widely used in the fields of chemical, pharmaceutical, foodstuff, pigments, new materials and military industries. Aokai has already stepped into the international market and established a good reputation.
With the development, the company has accumulated strong capital and technical strength, created an intelligent and harmonious team. The company has a pilot plant with many types of testing machine for customers to do test and select suitable models.
Aokai sincerely welcome the majority of insight to make great achievement together. Also warmly welcome to Aokai.
FAQ:
1. Q: Please describe your warranty period.
   A: 15 months after the equipment is arrived at the destination port or 12 months after  the installation and commissioning of the equipment, whichever comes first.
2. Q: Do you provide on-site installation and commissioning?
  A: Yes, we do. If on request, we'll provide the guidance of on-site installation and commissioning. Usually one mechanical engineer and one electrical engineer to assist.
3. Q: How about the cost of on-site installation and commissioning guidance?
   A: The cost consists of round-trip air tickets, room and board expenses, service cost (labor cost), and site transportation (or directly provided by client), which shall be paid additionally.
4. Q: Are you a factory or a trading company?
   A: We are a professional manufacturer. We have a pilot plant for customers to do sample testing.Â
Â
Plastic Particles Vacuum Conical Drying Machine
Model NO.: GSZG
Type: Double Cone Rotating
Structure: Rotary Type Drier
Operation Pressure: Vacuum
Appearance of Dried Sample: Pastes
Type of Flow: Contra-Flow
Function: Mixing and Drying
Condition: New
Certification: ISO, Ce, UL, GMP
Trademark: ChangAo
Transport Package: Wooden Box
Specification: 1800*720*1500-4350*2450*4950mm
Origin: Changzhou, China
HS Code: 8419399090
Advantages: