Torque Anchor is a simple and reliable subsurface tool  for preventing tubing back-off when using progressing cavity (PC) pumps. It transfers PC pump torque to the casing walls. The bypass capability of it is second to none. In most configurations, it offers greater than 95% of the potential bypass available past a similarly sized EUE coupling. Additionally, because it remains centralized there are no limits to pump size. Torque anchor also has the unique ability for 3/4 inch coil tubing to bypass the anchor smoothly regardless of orientation within the tubing. Torque Anchor uses wedge shaped anchoring blocks which bite into the casing wall when right hand torque is generated in the tubing string. These anchoring blocks are spring loaded so that transfer of torque to the casing is immediate (clockwise) and the tubing string may be freely rotated to the left (counter-clockwise). The running procedure of the anchor is straightforward. The anchor is installed below the pump and can be run in and out of the well freely. When the anchor has reached the required depth, the application of approximately 300ft-lbs right hand torque, will securely engage the anchoring blocks to the casing wall. The setting torque may now be locked in and the pump operation started. To disengage the anchor, simply stop the pump operation and relax initial setting torque. This Torque Anchor has been developed to provide extra bypass between the casing and torque anchor. The extra bypass will allow for unrestricted flow and will avoid sand bridging around the tool. Company Introduction: Tel: +86 0536-8663518 Web:www.wfbaofeng.com Oil Injected Screw Air Compressor Portable Screw Compressor,Oil Injected Screw Compressor,Oil Injected Screw Air Compressor,Oil Injected Rotary Screw Compressor Ningbo Xinda Screw Compressor Co., Ltd. , https://www.augustcompressor.com
 Applications
 Features & Benefits
Running Procedure
5 1/2 x 2 7/8 EUE Pin*Box
Â
Our company covers an area of 15000 square meters, office and production area occupies 5000 square meters. The company consists of one office and seven divisions: Technical research and development division, quality checking division, production division, purchasing division, marketing division, technical service division and financial division. Now there are 2Â workshops and 30 service workers, including 3Â managers, 2Â engineering technicians and 5Â marketing staff. The company owns over 80 sets of screw pump production equipment, four sets of screw pump and ground drive testing equipment. In 2008, the company passed ISO9001-2008 Quality System Certification, ISO14001: 2004 Environmental Management System Certification and OHSAS18001: 2007 Occupational Health and Safety Management System Certification.
Since foundation, our company is mainly engaged in development, production and marketing for screw pump oil production system. With complete processing equipment, scientific management system, and strong technical force and advanced technology, the company has formed and produced more than 50 kinds of screw pumps: From GLB20 to GLB3000, from conventional screw pump to high temperature screw pump, form single head screw pump to multi-head screw pump, from conventional screw pump to equal thickness screw pump, from ground drive screw pump to down-hole drive screw pump, from oil production screw pump to CBM special screw pump. They have been promoted and applied in Shengli Oilfield, Daqing Oilfield, Huabei Oilfield, Jilin Oilfield, Dagang Oilfield, Henan Oilfield, Xinjiang Oilfield, Inner Mongolia Oilfield, Kazakhstan Oilfield and Oman Oilfield, and gain praise from domestic and foreign users.Â
Contact Information:
Â
Â
Â
Progressive Cavity Pump (PCP) Specialized 5 1/2" Anchor
Model NO.: YGM221-150
Applicable Casing: 7 Inch
Max. Od of Rigid Body: 150 Mm
Seating Anchor Load: 60 Kn
ID of Center: 62
Upper Connection (Box): 2-7/8"
Upper Connection (Pin): 2-7/8"
Net Weight: 45kg
Trademark: Baofeng Brand
Transport Package: Wooden Box
Specification: API ISO
Origin: Weifang China
HS Code: 8413910000