The 2013 (3rd) national oil and chemical heat exchanger technology and equipment exchange meeting will be held in Wuxi, Jiangsu. The heat exchanger is an important heat energy exchange device in the production of petroleum and chemical industry, and can be used as a heater, a cooler, a condenser, an evaporator, a reboiler, etc., and is widely used. In recent years, with the rapid development of China's petrochemical, energy, electricity, and environmental protection industries, the demand for heat exchangers has risen sharply. The large-scale project construction of ethylene projects, coal chemical projects, nuclear power plants, wind farms, environmental protection, and desalination all generate huge demand for the heat exchanger industry. As the largest market for heat exchanger industry, the scale of petrochemical industry has exceeded 15 billion yuan. The equipment costs for the large-scale coal chemical projects approved for construction during the 12th Five-Year Plan period will also exceed 500 billion yuan, and the average annual growth rate of the heat exchanger industry, which accounts for the largest proportion of equipment investment, will reach 40%. According to Zhang Zhongqing, the heat exchanger committee of the China Pressure Vessel Society, China's heat exchanger industry is mainly concentrated in the northeast, northwest, north China and east China. China's "Twelfth Five-Year Plan" continues to regard energy conservation and emission reduction as a constraint indicator for national economic and social development, and proposes energy-saving and emission reduction targets for energy consumption per unit of GDP in 2015 that is reduced by 16% compared with 2010. The state continues to encourage enterprises to increase investment in energy-saving emission reduction technology and technological innovation, and enhance their ability to independently innovate. Cheng Zhifang, secretary-general of the China Chemical Machinery and Power Technology Association, pointed out in an interview: At present, many universities, research institutes, and enterprises have done a lot of work in the development and application of new technologies for heat exchangers, and have achieved some results. China's heat exchanger technology basic research is still weak. In the manufacture of heat exchangers, China is still based on imitation, there is still a certain gap between the level of mold processing and sheet pressing and developed countries. In terms of design, core technology is monopolized by foreign companies. In the design standards, China's heat exchanger design standards and technologies are lagging behind. The design of large-scale specialized heat exchangers lacks the support of large-scale specialized software. It is impossible to accurately predict the effect of product use, and the products are in a disadvantageous position in the bidding process. The petroleum and chemical industry is a traditional high-energy-consuming industry. It is an important battlefield for energy conservation and emission reduction. The task is arduous. Further tapping the energy-saving potential, especially the energy-saving potential of key energy-consuming industries, is an important measure to ensure the sustainable development of the petroleum and chemical industries. Major energy-consuming industries such as oil refining, ethylene, synthetic ammonia, caustic soda, calcium carbide, soda ash and yellow phosphorus have great potential for energy conservation. The company expects to reduce its comprehensive energy consumption targets through technological innovation and deepening technological transformation. For this reason, enterprises have put forward higher requirements for the improvement of energy efficiency of heat exchangers, and heat exchanger technology and equipment transformation with remarkable energy saving and material saving effects have attracted attention. In order to summarize and exchange latest development achievements and application experience of heat exchanger technology and equipment in the field of chemical engineering in recent years at home and abroad, we provide product exchange information, technical cooperation and product introduction for heat exchanger users, heat exchanger manufacturing and material supporting enterprises. The platform to better promote the industrialization of scientific research results. China Chemical News will hold the 2013 (3rd) National Thermoelectric and Chemical Heat Exchanger Technical and Equipment Exchange Conference on July 17-19, 2013 in Wuxi. The conference specially invited industry experts such as scientific research institutes and engineering design institutes to give special technical reports, introduce the latest technologies and latest achievements, and attendees’ problems in the process of design, production and technological transformation, as well as equipment technical selection and problems in procurement. Conduct research. China Pin Type Fork,Customized Pin Type Fork manufacturers, welcome Pin Type Shaft Forklift Fork,High Quality Pin Type Forklift Forks purchasers from worldwide to visit our site. Pin Type Fork,Customized Pin Type Fork,Pin Type Shaft Forklift Fork,High Quality Pin Type Forklift Forks Shandong Techence Forging Co.,Ltd , https://www.shandongtechence.com