-
Model NO.: MS-Square
-
Ventilation Mode: Mechanical Ventilation
-
Air Contact Form: Wet
-
Tower Shape: Square
-
Application Fields: Industrial
-
Condition: New
-
Total Power Consumption: 45.83% Reduction
-
Lower Noise Level: Standard Ms-Square Model by 7~10 dB.
-
Trademark: JUMSEN
-
Origin: Xiamen
-
Cooling Method: Cross Flow
-
Material: FRP
-
Air Contact Way: Open
-
Noise Level: Low
-
Certification: ISO
-
Energy Saving: Save 30-50%
-
Practical Cooling Towers with Sizes: Ranging From 5 Tons to 1500 Tons
-
Port: Xiamen
-
Specification: SGS, ISO
-
HS Code: 8419899090
JUMSEN COOLING TOWER , SAVE 30%-50% OF POWER
Jumsen series MSN cooling towers have been designed for cross flow type with Low Noise Motor and Fan. The compact design is suitable for Equipment Cooling, Industrial Process Cooling and Air Conditioning.
Product Features
International Standards
Series MSN cooling towers have been designed according to the international standards featuring light weight structure, easy transport, easy hoisting, and easy site installation.
Low Noise & Easy Maintenance
Series MSN cooling tower use high tension V-belt reducers, which are correspond to the low noise axial fans featuring silent operation and easy maintenance.
Light Weight, Smaller Footprint and Multi-Cell Installation
Comparing with other types of cooling tower, MSN features lighter operational weight and smaller footprint. Also the combinative multi-cell structure is suitable for large cooling requirement and future expansion.
High Efficiency Non-Clog Distribution System
Water distribution system consists of spray header and branches with large orifice, non-clog nozzles to spray water evenly on the surface of fill to promote the best mixing of air and water.
High Efficient Fill
Unique design of vacuum-formed and chevron configuration type fill with ripple surface facilitates even spread and long duration of water drop and free of deposits and scales to get best heat transfer.
Long Service Life
MSN tower components are made of weatherproof and anticorrosive materials. Casing is constructed of anti-ultraviolet FRP which features soundproof and non-decayed merits with fine streamline outlook. Basin are made by F.R.P. Fill and inlet louvers are by P.V.C. Supporting rack is made of light weight steel. All the steel parts are hot dip galvanized so as to prolong the service life.
| MODEL |
Flow(m³/h) |
Tower Dimension(mm) |
Fan diameter(mm) |
Motor rate(KW) |
Water pressure(Kpa) |
Weight |
| Length |
Width |
Height |
Dry |
Wet |
| MS-100L/SB |
100 |
1980 |
3200 |
3600 |
1450 |
2.2(4) |
36 |
860 |
2260 |
| MS-125L/SB |
125 |
2320 |
3600 |
3600 |
1750 |
2.2(4) |
36 |
1080 |
2830 |
| MS-150L/SB |
150 |
2600 |
3800 |
3600 |
2100 |
4(5.5) |
38 |
1180 |
3550 |
| MS-175L/SB |
175 |
2930 |
3800 |
3600 |
2100 |
4(5.5) |
38 |
1300 |
3810 |
| MS-200L/SB |
200 |
3040 |
4300 |
3600 |
2400 |
5.5(7.5) |
38 |
1600 |
4020 |
| MS-250L/SB |
250 |
3000 |
5300 |
4100 |
2400 |
5.5(7.5) |
40 |
2380 |
5280 |
| MS-300L/SB |
300 |
3250 |
5550 |
4100 |
2700 |
11 |
40 |
2580 |
5650 |
| MS-350L/SB |
350 |
3500 |
5800 |
4100 |
2700 |
11 |
40 |
2850 |
6270 |
contact detail
Name : Ms. Yanyan Xie
Mobile : 86 - 592 - 5970673
If you have any question or requirements, please don't hesitate to contact us.Thank you for browsing our website and reading our products .
| Products name |
 |
| Products Design |
The compact design is suitable for Equipment Cooling, Industrial Process Cooling and Air Conditioning. |
| Services |
We can supply comprehensive service for you with professional production, sales, shipping and after-service team. |
Medical equipment is designed to aid in the
diagnosis, monitoring or treatment of medical conditions
Medical devices alone or in combination
refers to any instrument, apparatus, appliances, materials or other articles,
including the required software. For in vivo therapeutic effect of the human
body surface and not by pharmacological, immunological or metabolic means to
obtain, but the medical device products played a supporting role. During use,
it is expected to achieve the following purposes: disease prevention,
diagnosis, treatment, monitoring, mitigation; injury or disability diagnosis,
treatment, monitoring, mitigation, compensation; anatomical or physiological
process of research, replacement or modification; pregnancy control.
Procedure
Casting ,Die Casting, forging, stamping,
machining,injection
Types
There are several basic types:
Diagnostic equipment includes medical
imaging machines, used to aid in diagnosis. Examples are ultrasound and MRI
machines, PET and CT scanners, and x-ray machines.
Treatment equipment includes infusion
pumps, medical lasers and LASIK surgical machines.
Life support equipment is used to maintain
a patient's bodily function. This includes medical ventilators, anaesthetic
machines, heart-lung machines, ECMO, and dialysis machines.
Medical monitors allow medical staff to
measure a patient's medical state. Monitors may measure patient vital signs and
other parameters including ECG, EEG, and blood pressure.
Medical laboratory equipment automates or
helps analyze blood, urine, genes, and dissolved gases in the blood.
Diagnostic Medical Equipment may also be
used in the home for certain purposes, e.g. for the control of diabetes
mellitus
Therapeutic: physical therapy machines like
continuous passive range of motion (CPM) machines
We supply big range of such medical
equipment parts
B.
Main particulars
|
|
MAIN
PARTICULARS
|
|
Material
|
Carbon
steel(20#-60#, S235-S355-), Alloy steel(4140,4340,42CrMo, -), Powder metal, stainless steel, aluminum alloy, zinc alloy, brass, gray iron,
cast iron, ductile Iron or other specified
|
|
Standard
|
ASTM, ASME, DIN, JIS,
ISO, BS, API, EN
|
|
Certificate
|
ISO9001
|
|
Tolerance
|
Up
to +/- 0.002mm
|
|
Dimension
|
As
per drawing, as large as we can
|
|
Processing
|
CNC
turning, CNC turning and milling compound processing, 3/4/5 axis CNC
machining center, wire-cutting, EDM, grinding etc.
|
|
Finishing
surface
|
Machined
surface with oil, blasting and painting, anodize, polishing, powder painting,
electrophoretic coating-
|
|
Marking
|
as
per clients` requirements
|
|
Inspection
|
material,
construction, dimension, heat treatment, hardness, NDT
|
|
Quality
|
ISO9001,
PPAP control production
|
|
Lead
time
|
3-20
days for sample, consult with customer for mass production
|
|
Delivery
|
Express
for sample, ocean shipping/air for mass production
|
|
Our
Capabilities
|
CNC
machining, CNC center machining, drilling, milling, turning, grinding, tapping,
boring
|
|
Engineering
& manufacturing services
|
R&D
process, tooling and gauging design, product design
Integrated
CAD/CAM system, test and measuring
|
|
Others
|
Recyclable,
in line with environmental requirements and standards, and reliable
|
C.
Construction
Construction
by casting, forging, stamping, injection and machining
D
Workmanship
The
workmanship have good production practice. Care are taken to ensure High
accuracy and smooth surfaces
E.
Certificates
-
Material certificates
-
Measuring reports
-
Inspection protocol
-
NDT reports
-
Fixed certificate: ISO9001 certificate
Our
service
Besides
above the general specifications, we can also supply some specific machining
parts as clients' requirements.
Package
and shipping
Export
cartons, pallets, wooden cases, Polybags
container
package and container transportation
Medical Equipment Parts
Medical Equipment Parts,Oem Medical Equipment Parts,Customize Medical Equipment Parts,Plastic Medical Equipment Parts
Shinvast Industry Ltd , https://www.shinvastindustry.com