Food Machinery Precision Casting or food machinery investment casting, silica sol process. It is a casting process with little or no cutting.
Cast food machinery is an excellent process technology in the foundry industry. Its application is very extensive. Food machinery cast not only applies to the casting of various types and alloys, but also produces the dimensional accuracy of castings. The surface quality is higher than that of other casting methods, and even castings that are difficult to cast and which are difficult to cast have high temperature resistance and are not easily processed can be cast using investment casting.
In wax pattern process,we mix stearic acid and paraffin wax in wax pattern making,as you know,it is better than polyethylene,and the wax deformation is small.
In shell making,we adopt automatic sand-covering production line, which was invented under the guidance of our general manager.The indoor temperature was controlled by air-conditions,keeping the temperature at 24℃±1℃, which can make the castings much more stable,the internal tissues much more well-proportioned.
In shell hardening process,we use aluminium chloride to harden the shell.This can make the shell so hard that it can`t be distorted,at the same time the bug which the casting may have will be decreased.If there are letters or numbers in it,they will be much clearer.
In dewaxing process,about 95% of the castings suppliers adopt the original water dewaxing technics,but we using the advanced steam dewaxing technics,which we are very proud of. This can effectively avoid the air-hole and sand-hole, making the casting look much nicer.
In smelt process, we use middle frequency furnace, avoiding the emergence of the oxide; in molten steel control part, we use Germany-imported direct reading spectrometer machine, assuring its quality before the molten steel out of the furnace. During this process we use ERP production and management software to get the feedback information.
In shell-knock out process, we have special machines,which can decrease the hitting and knocking, easily made by manual shell knocking out.
In shot-blasting process, we have crawler-type and hanging shot-blasting machine, with steel shot 0.5-0.8, making the products smooth.Of course, if the customer wants it look much nicer, we also can carry out sand-blast treatment.
In heat treatment process, we use electric furnace, and adopt double-temperature control in order to heat the products equally. As a result, the products will have great metallurgical structure.
Our tolerance can reach at the grade of 5-7 according to our country`s tolerance standard.
In machining process,we have 12 CNC machining centers and some other machines, so we can make further machining if the customers need.
Precision Casting Of Food Machinery Precision Casting Of Food Machinery,Investment Casts for Food Machinery,Food Machinery Investment Casts,Steel Casting for Food Machinery Wei fang junlong precision casting Co.,Ltd , https://www.junlongcasting.com
Â
1.Machine introduction of Wire Stripping Machine For Copper:
This machine is suitable for various wires/cables,such as single-core wire,multi-core wire,aluminium wire/cable and copper wire/cable etc.,whose diameter is Ø1/13′~Ø5/3′.
Â
2.Technical parameters of Wire Stripping Machine For Copper:
Model No.
HT-BXJ002
Voltage
110V/230V/240V/380V (50/60HZ)
Power
1.5KW/2HP
Dia.of Wire/Cable Stripped
Ø1/13'~Ø5/3'
Machine Dimension
L540*W410*H500mm
Machine Weight
69kg
Other models of Wire Stripping Machine For Copper:
Model No.
HT-918-A
HT-918-F
HT-918-KA
HT-918-KOB
HT-918-B
HT-918-B-1
Power
1.5KW
1.5KW
2.2KW
2.2KW
4KW
5.5KW
Dia.of Wire/Cable Stripped
1-25mm
1-30mm
1-35mm
1-42mm
2-100mm
10-165mm
Capacity
100-300kg/day
150-300 kg/day
400-1000 kg/day
600-1500 kg/day
200-3000kg/day
1000-3000kg/day
Dimension
L550*W510*H840mm
L560*W550*H840mm
L600*W580*H840mm
L700*W610*H840mm
L800*W580*H1200mm
L900*W580*H1200mm
Weight
60kg
70kg
80kg
110kg
200KG
250KG
 3.Machine Photos:
4.Company Certificate:
5.Packing&Delivery:
6.Our Customer:
7.Contact Information:
If you need further information, please contact us freely, we will do our best to cooperate with you.
                                  High Effeciency Coaxial Cable Stripping Machine  Â
Â
1.Machine introduction of Wire Stripping Machine For Copper:
This machine is suitable for various wires/cables,such as single-core wire,multi-core wire,aluminium wire/cable and copper wire/cable etc.,whose diameter is Ø1/13′~Ø5/3′.
Â
2.Technical parameters of Wire Stripping Machine For Copper:
Model No.
HT-BXJ002
Voltage
110V/230V/240V/380V (50/60HZ)
Power
1.5KW/2HP
Dia.of Wire/Cable Stripped
Ø1/13'~Ø5/3'
Machine Dimension
L540*W410*H500mm
Machine Weight
69kg
Other models of Wire Stripping Machine For Copper:
Model No.
HT-918-A
HT-918-F
HT-918-KA
HT-918-KOB
HT-918-B
HT-918-B-1
Power
1.5KW
1.5KW
2.2KW
2.2KW
4KW
5.5KW
Dia.of Wire/Cable Stripped
1-25mm
1-30mm
1-35mm
1-42mm
2-100mm
10-165mm
Capacity
100-300kg/day
150-300 kg/day
400-1000 kg/day
600-1500 kg/day
200-3000kg/day
1000-3000kg/day
Dimension
L550*W510*H840mm
L560*W550*H840mm
L600*W580*H840mm
L700*W610*H840mm
L800*W580*H1200mm
L900*W580*H1200mm
Weight
60kg
70kg
80kg
110kg
200KG
250KG
 3.Machine Photos:
4.Company Certificate:
5.Packing&Delivery:
6.Our Customer:
7.Contact Information:
If you need further information, please contact us freely, we will do our best to cooperate with you.
Good Quality Scrap Wire Stripping Machine for Copper
Model NO.: HT-BXJ002
Model: Ht-Bxj002
Power: 1.5kw/2HP
Dimension: L540*W410*H500mm
Weight: 69kg
Trademark: HONEST
Transport Package: Fumigation-Free Wooden Case
Specification: HT-BXJ002
Origin: China
Model NO.: HT-BXJ002
Model: Ht-Bxj002
Power: 1.5kw/2HP
Dimension: L540*W410*H500mm
Weight: 69kg
Trademark: HONEST
Transport Package: Fumigation-Free Wooden Case
Specification: HT-BXJ002
Origin: China
                                  High Effeciency Coaxial Cable Stripping Machine  Â