Product Description
1/4inch DC 12V 2 Way Normally Closed Pneumatic Aluminum Electric Solenoid water Valve is to control On/Off of air and inert gas. This solenoid valve has one1/4" inch inlet and one 1/4" inch outlet port. Valve stays close when the coilis de-energized- and it opens when energized. Has two holes in the bottom andcan be mounted in any position.
Item |
2 way flow control 2 inch water solenoid valve for irrigation |
Size Range |
DN10 to DN50, 3/8" to 2" |
Operating Pressure |
Low Pressure, 0 to 1.0MPa (0 to 150PSI) |
Number of Ways |
2/2 Valve, Two Ways Two Position |
Valve Operation Type |
Normally Open, Closes When Energized |
Body Material |
Stainless Steel |
End Connection |
Female Thread |
Coil Voltage |
DC24V (±10%), AC110-220V, 50/60Hz |
Applicable Media |
Control of Water, Air, Gas, Oil, Liquid, Steam |
Temp. of Media |
Range from -10 to +80°C (14 to 176°F) with NBR Sealing |
Ambient Temp. |
Range from -20 to +60°C (-4 to 140°F) |
Protection Class |
IP67, Explosion-protected Construction are Available |
Application |
Food & Beverage, Water & Wastewater, Ultra Pure Water, Desalination, Chemical, Textile, Pharmaceutical, Pulp & Paper, Mining, Boiler and Power Industries |
Installation and maintenance:
1. The pipe must be clean and clean.
2. Install as needed, but it is best to make the actuator face up. Notice the flow direction.
3. Connect the valve to the pipe, note the actuator need to be removed only if the user has a special request.
4. Before opening or repairing the Angle valve, cut off the fluid and control the air source and reduce the pressure in the piping system.
We will give you a reply within 24 hours after receiving your inquiry.
Packing & Delivery:
Delivery Details : 3-5 working day for sample, 2-7 working day for small products, 15-30 working day for mass products.Â
Packaging Details:shrink wrapped - carton - plywood case or according to customers' requirement.
Usually we ship your order by sea or by air...
We'll tell you the tracking number once your order has been sent
We accept T/T Bank transfer, L/C, Western Union, Moneygram, Paypal
FAQ:
1. Are you a factory or the trading company?
Q:We are manufacturing factory and we have the export licensed
2. Do you have any guarantee on the quality of your valves?
 Q:Quality assurance for more than one year
3.What is you delivery time?
Q:A week for sample; 15-30days for mass production.
4.Which port are you shipping?
Q:Ningbo or Shanghai Port
5.Can we print the LOGO on products?
Yes, and we support the OEM.
6.Do you have any certification?
Q:Yes, we have 12Â patents for the products.
7.Why can we trust that you will deliver goods after remittance?
Q:We are the honest merchant.and you will get the assurance from Made-in-china if you choose us,and  our factory has been inspected by SGS .
8.Can I get some samples?
Q:Yes .Free samples will be sent to you by express mail
9.May I visit your factory?
Q:Sure,welcome any time. We can also pick you up at airport and station.
10.We are always ready for providing the sample and producing some small orders, in order to meet the business well.
Q:We are always ready to hear from you.
Product Description
1/4inch DC 12V 2 Way Normally Closed Pneumatic Aluminum Electric Solenoid water Valve is to control On/Off of air and inert gas. This solenoid valve has one1/4" inch inlet and one 1/4" inch outlet port. Valve stays close when the coilis de-energized- and it opens when energized. Has two holes in the bottom andcan be mounted in any position.
Item |
2 way flow control 2 inch water solenoid valve for irrigation |
Size Range |
DN10 to DN50, 3/8" to 2" |
Operating Pressure |
Low Pressure, 0 to 1.0MPa (0 to 150PSI) |
Number of Ways |
2/2 Valve, Two Ways Two Position |
Valve Operation Type |
Normally Open, Closes When Energized |
Body Material |
Stainless Steel |
End Connection |
Female Thread |
Coil Voltage |
DC24V (±10%), AC110-220V, 50/60Hz |
Applicable Media |
Control of Water, Air, Gas, Oil, Liquid, Steam |
Temp. of Media |
Range from -10 to +80°C (14 to 176°F) with NBR Sealing |
Ambient Temp. |
Range from -20 to +60°C (-4 to 140°F) |
Protection Class |
IP67, Explosion-protected Construction are Available |
Application |
Food & Beverage, Water & Wastewater, Ultra Pure Water, Desalination, Chemical, Textile, Pharmaceutical, Pulp & Paper, Mining, Boiler and Power Industries |
Installation and maintenance:
1. The pipe must be clean and clean.
2. Install as needed, but it is best to make the actuator face up. Notice the flow direction.
3. Connect the valve to the pipe, note the actuator need to be removed only if the user has a special request.
4. Before opening or repairing the Angle valve, cut off the fluid and control the air source and reduce the pressure in the piping system.
We will give you a reply within 24 hours after receiving your inquiry.
Packing & Delivery:
Delivery Details : 3-5 working day for sample, 2-7 working day for small products, 15-30 working day for mass products.Â
Packaging Details:shrink wrapped - carton - plywood case or according to customers' requirement.
Usually we ship your order by sea or by air...
We'll tell you the tracking number once your order has been sent
We accept T/T Bank transfer, L/C, Western Union, Moneygram, Paypal
FAQ:
1. Are you a factory or the trading company?
Q:We are manufacturing factory and we have the export licensed
2. Do you have any guarantee on the quality of your valves?
 Q:Quality assurance for more than one year
3.What is you delivery time?
Q:A week for sample; 15-30days for mass production.
4.Which port are you shipping?
Q:Ningbo or Shanghai Port
5.Can we print the LOGO on products?
Yes, and we support the OEM.
6.Do you have any certification?
Q:Yes, we have 12Â patents for the products.
7.Why can we trust that you will deliver goods after remittance?
Q:We are the honest merchant.and you will get the assurance from Made-in-china if you choose us,and  our factory has been inspected by SGS .
8.Can I get some samples?
Q:Yes .Free samples will be sent to you by express mail
9.May I visit your factory?
Q:Sure,welcome any time. We can also pick you up at airport and station.
10.We are always ready for providing the sample and producing some small orders, in order to meet the business well.
Q:We are always ready to hear from you.
Iron Shielded Deep Groove Ball Bearing is one type of ball bearings. shields are non-contact metallic (carbon or stainless steel) devices which allow high-speed operation but offer limited protection against the ingress of moisture and dirt. but do not protect against liquids. They add no friction during operation and therefore do not generate heat build-up. Iron shielded deep groove ball bearings often have steel shields installed on one or both sides and are pre-lubricated with grease. While many different retainers are available, pressed steel cages are most commonly used.
Bearing dust shields have been available almost as long as Ball Bearing itself. Shields are needed to stop the grease lubrication used in these bearings from leaking out. This is particularly important in applications where grease leakage may contaminate the product. The main impetus towards shielded bearings comes from the growing use of [sealed-for-life" bearings in items such as white goods, cars and power tools. Shields are fitted in the outer ring and do not make contact with the inner ring, but form a narrow gap with it.
Depending on the bearing design, series and size, MANU supplies shields in different designs.
With one shield (-Z) on one side or two shields (-2Z/ZZ) on both sides; Due to the manufacturing processes used, open bearings can have turned recesses in the outer ring for shields.
Celarance:
Internal clearance provides the bearing room for expansion between the bearing races and will add a small amount of play between the two rings. Large clearance C3/C4 usually used in harsh environment. with good anti-seize performance used in particularly harsh environment.
Tolerances
The standard version of our single-row deep groove ball bearings has the tolerance class P0
(designs with tighter tolerances available upon request)
To be the first class, to do the best quality, to make users satisfied, to ensure customers relieved, are our enterprise purposes. Welcome bearing dealers` and Conveyor Idler manufacturers contact from all over the world, and become our partner.
Iron Shielded Deep Groove Ball Bearing
Iron Seals Ball Bearing,Iron Sealed Ball Bearing,Iron Shielded Bearing,Steel Shielded Bearing
Shandong Xinkaite Bearing Co., Ltd. , https://www.idlerbearing.nl