Multifunctional Drawn Arc Welder for Studs

Model NO.: DCD3600A
Welding Time: 20-1500ms
Frequency: 50-60Hz
Maximum Power: 180kVA
Cooling System: Fan
Degree of Protection: IP22
Current: Alternating Current
Model: Dcd3600A
Trademark: Mengzhijie
Specification: 900x640x650 mm
Origin: Zhangjiagang, Jiangsu
HS Code: 85153900
Model NO.: DCD3600A
Welding Time: 20-1500ms
Frequency: 50-60Hz
Maximum Power: 180kVA
Cooling System: Fan
Degree of Protection: IP22
Current: Alternating Current
Model: Dcd3600A
Trademark: Mengzhijie
Specification: 900x640x650 mm
Origin: Zhangjiagang, Jiangsu
HS Code: 85153900
Multifunctional Drawn Arc Welder For Studs

Multifunctional welding machine has the following characteristics:
1. Multifunctional stud welding machine has two sets of parallel or separated principle stud welding machines, not only can achieve small current welding, but also high current welding. This kind welding machine has a wide welding range, covering almost all the size of welding studs in the market, and the welding efficiency is extremely clear.
2. When separated, if one of the welder fails when construction, another welder can use as usual, so that can win valuable time for the production. In inspection and repair, circuit boards can be interchanged, so that can determine the point of failure timely. Easy to repair, do not affect the production. When in parallel, welding power doubled, can be used to weld pins with large sizes.
3. Since there are 4 grounding wires in a set of multifunctional welding machine, uniformly distributed to the workpieces, effectively eliminate magnetic blow and make the seam of the welding studs more full round.
4. Parallel multifunctional welding machines are equivalent to a set of high-power stud welding machine, and separated multifunctional welding machines are equivalent to two sets of small power stud welding machines.
5. Two small stud welding machines with a chassis have low cost and light weight. The price is 75% of two sets of small power stud welding machines. That means 25% cost is saved.
6. DCD series of stud welding machines are mature products. After years of actual use, the failure rate is very low and the lifetime is up to one million times. Used in conjunction with high-tech products AJLH-III-type stud welding gun. A combined welding gun, can be used to weld various specifications of studs from 5 mm to 36 mm. High welding pass rate, easy to use.
Power Specs
Power Supply Model DCD3600A
Input Voltage Three-phase 380VAC±10% Frequency 50-60HZ
Output Voltage 45-90V Welding speed 5-30pcs / min
Rated current of Separated machine DC1800A 90A Output Current 300A-1800A(Five-speed)
Welding range of Separated machine 5mm-22mm Single Maximum Power 90KVA
Rated current of parallel machine DC3600A 180A Output Current 600A-3600A(Ten-speed)
Welding range of parallel  machine 6mm-36mm Maximum power of single machine 180KVA
Welding time 20-1500ms Cooling System Fan
Transformer protection H Protection class IP22
Weight KG Dimensions(mm) 900×640×650
Settings of DC3600-type Drawn Arc Welding Gun (Parallel machine)
Welding  method Stud diameter Power Settings Extended length(mm) Mention stretch height(mm) Time 
Porcelain Biosphere Φ6 1 1 2.5 1.5 0.15
Porcelain Biosphere Φ8 1 1 2.5 1.5 0.25
Porcelain Biosphere Φ 10 1 2 3.0 1.5 0.2
Porcelain Biosphere Φ 12 1 2 4.0 1.5 0.3
Porcelain Biosphere Φ 13 2 2 4.5 1.5 0.25
Porcelain Biosphere Φ 14 2 2 4.5 1.5 0.25
Porcelain Biosphere Φ 16 2 2 4.5 1.5 0.3
Porcelain Biosphere Φ 19 2 3 2.5 6 0.45
Porcelain Biosphere Φ 22 3 3 3 6 0.3
Porcelain Biosphere Φ 25 3 4 3 6 0.4
Porcelain Biosphere Φ 28 4 4 3 6 0.4
Porcelain Biosphere Φ32 4 5 3 6 0.5
Porcelain Biosphere Φ36 5 5 3 6 0.6
Multifunctional Drawn Arc Welder For Studs

Multifunctional welding machine has the following characteristics:
1. Multifunctional stud welding machine has two sets of parallel or separated principle stud welding machines, not only can achieve small current welding, but also high current welding. This kind welding machine has a wide welding range, covering almost all the size of welding studs in the market, and the welding efficiency is extremely clear.
2. When separated, if one of the welder fails when construction, another welder can use as usual, so that can win valuable time for the production. In inspection and repair, circuit boards can be interchanged, so that can determine the point of failure timely. Easy to repair, do not affect the production. When in parallel, welding power doubled, can be used to weld pins with large sizes.
3. Since there are 4 grounding wires in a set of multifunctional welding machine, uniformly distributed to the workpieces, effectively eliminate magnetic blow and make the seam of the welding studs more full round.
4. Parallel multifunctional welding machines are equivalent to a set of high-power stud welding machine, and separated multifunctional welding machines are equivalent to two sets of small power stud welding machines.
5. Two small stud welding machines with a chassis have low cost and light weight. The price is 75% of two sets of small power stud welding machines. That means 25% cost is saved.
6. DCD series of stud welding machines are mature products. After years of actual use, the failure rate is very low and the lifetime is up to one million times. Used in conjunction with high-tech products AJLH-III-type stud welding gun. A combined welding gun, can be used to weld various specifications of studs from 5 mm to 36 mm. High welding pass rate, easy to use.
Power Specs
Power Supply Model DCD3600A
Input Voltage Three-phase 380VAC±10% Frequency 50-60HZ
Output Voltage 45-90V Welding speed 5-30pcs / min
Rated current of Separated machine DC1800A 90A Output Current 300A-1800A(Five-speed)
Welding range of Separated machine 5mm-22mm Single Maximum Power 90KVA
Rated current of parallel machine DC3600A 180A Output Current 600A-3600A(Ten-speed)
Welding range of parallel  machine 6mm-36mm Maximum power of single machine 180KVA
Welding time 20-1500ms Cooling System Fan
Transformer protection H Protection class IP22
Weight KG Dimensions(mm) 900×640×650
Settings of DC3600-type Drawn Arc Welding Gun (Parallel machine)
Welding  method Stud diameter Power Settings Extended length(mm) Mention stretch height(mm) Time 
Porcelain Biosphere Φ6 1 1 2.5 1.5 0.15
Porcelain Biosphere Φ8 1 1 2.5 1.5 0.25
Porcelain Biosphere Φ 10 1 2 3.0 1.5 0.2
Porcelain Biosphere Φ 12 1 2 4.0 1.5 0.3
Porcelain Biosphere Φ 13 2 2 4.5 1.5 0.25
Porcelain Biosphere Φ 14 2 2 4.5 1.5 0.25
Porcelain Biosphere Φ 16 2 2 4.5 1.5 0.3
Porcelain Biosphere Φ 19 2 3 2.5 6 0.45
Porcelain Biosphere Φ 22 3 3 3 6 0.3
Porcelain Biosphere Φ 25 3 4 3 6 0.4
Porcelain Biosphere Φ 28 4 4 3 6 0.4
Porcelain Biosphere Φ32 4 5 3 6 0.5
Porcelain Biosphere Φ36 5 5 3 6 0.6

IKIA carrier packing belt

       The IKIA carrier packing belt easy to carry , have many colors and many kinds of logos can be printed on it .We welcome OEM and ODM to our producton . We can produce the belt according the customer's requirments with any size . We will supply the best service for our customer.


packing belt

Key Specifications


Color: mainly black or accoding customer's requirment
Material: durable soft oxford fiber and POM plastic.
Size (total length*width): about 175*5cm 74.8*2 inches or accoding customer's requirment
High density, high strength and durable belt
Adjustable belt for fitting many luggage boxes or bags
Suitable for your luggage packing during trip

bike carrier belt


Service

1.If the package is broken because of the Express , You can complain with them.

2. Man-made damaged , Buyers take full responsibility.

3.You may return most new, unused items sold within 7 days after you received the goods for exchange or refund. Pls contact us before you return. Our service representitive will help you and Handle Returns and Refunds Gracefully as a part of our business


Carrier Belt

Carrier Belt,Carrier Luggage Belt,Rubber Carrier Belt,Rubber Carrier Strap

Hebei YIJIASHUN Trading Co.,Ltd , https://www.ikiabicycle.com