Portable Climbing Pipe Cutting and Beveling Machine Hydraulic Travel Cutter

Model NO.: TC0672
Clearance: 254-305mm(10"-12")radial,depending on pipe diame
Feed Method: Positive, non-slip chain drive.
Finish: Paint
Cutter Speed: Adjustable 0-60RPM
Installation: Vertical or horizontal installation
Operating Dimension: 610X510X280mm
Operating Weight: 100kg
Trademark: Bohyar
Transport Package: Wooden Case/Metal Case
Specification: TC0672
Origin: Suzhou, Jiangsu, China
Travel Cutter
Portable Climbing Pipe Cutting and Beveling Machine Hydraulic Travel Cutter
★ Introduction:
TC Series of Pipe Cutting and Beveling Machine is the pipe processing equipment independently developed by BHY based on the market and prospect of pipe service industry. The products are portable, precise, and efficient and in modular design, fully meeting customer demands, so they are the perfect choice for the cutting and beveling of various pipes.


★ Industry Application:
It is widely used in long-distance transport pipeline, power plant, nuclear power, petroleum, chemical engineering, natural gas, boiler shop, pharmacy, pipe prefabrication plant, pipeline installation engineering, rush-repair work, etc.  
 

★ Cutting and Beveling tools
We have standard beveling tools of 30°,37° and also can customize the tools.

Portable Climbing Pipe Cutting and Beveling Machine Hydraulic Travel Cutter


★ Product Features:
•Compact Design
Easy Set-upLight weight, low profile design needs only 10'' to 12'' of clearance and set up time is 30 minutes or less. Once the adjustable drive chain is pinned together and tensioned around the pipe the machine is ready to operate.
•Standard Weld Prep Capability
Weld preparation detail can be achieved from common 30° and 37-1/2°bevel on standard wall carbon steel.

•Wide range of applications
Available for cutting and beveling in flooded trenches and underwater mud at 600 feet.
•Pipe Line Maintenance
The Bohyar Travel Cutter offers the inherent advantages of a completely sealed and self-lubricating closed loop system. It is particularly suited to field machining operations under the type of hostile conditions often found in pipe line maintenance and construction such as dirt, sand and water.
•Horizontal and vertical cutting
With hydraulic power, the Travel Cutter will operate on horizontal or vertical pipe, in the field or in the shop. 
•Safe, Cold Cutting
The Bohyar Travel Cutter can be used in explosive conditions, on natural gas, crude, product and fuel lines.
•Fast, Reliable
A standard wall pipe can be cut and beveled with a cutting speed of approximately 2 minutes per 1'' of pipe diameter. Cutting time varies for heavier walls and harder alloys.
•Corrosion resistance
Use stainless steel screws, special bearings, seals and zinc layer including attachment prevents corrosion due to the long-term job in brine that may arise.


★ Technical Parameters 
Model TC0672 Processing Range 6"-72"(153mm-1829mm)
Drive Hydraulic Wall Thickness 5mm-25mm
Hydraulic Requirements 15 gpm @ 1500 psi.
(57LPM,106bar)
Clearance 254-305 mm (10"-12")radial,depending on pipe diameter. 20"axial(508 mm)
Feed Method Positive, non-slip chain drive. Finish Paint
Cutter Speed Adjustable 0-60RPM Installation Vertical or horizontal installation
Operating Dimension 610x510x280(mm) Operating Weight 100kg
Hydraulic Control Cutter on-off, feed on-off. Flow control valves which can adjust feed speed. Separate controls, providing adjustable feed and cutter speed. Forward/Reverse travel permits machine to be backed up.

★ Wheel Setting
•Pipe O.D :6.00"-13.99"(152mm-355mm) :      Wheel Position: 3&4
•Pipe O.D :14.00"-19.99"(356mm-508mm) :    Wheel Position: 3&5
•Pipe O.D :20.00"-35.99"(508mm-914mm):     Wheel Position: 2&5
•Pipe O.D :36.00"-47.99"(914mm-1219mm):   Wheel Position: 2&6
•Pipe O.D :48.00"-72.00"(1219mm-1829mm): Wheel Position: 1&6
Portable Climbing Pipe Cutting and Beveling Machine Hydraulic Travel Cutter

★ Included in our Travel Cutter
•Operating Manual, operating tools and spare chain connecting pins.
•Basic  chain for 6'' dia. pipe
•Steel storage case.


BHY-Reliable On-site Machining Solutions
No. 28Datong Road, Suzhou New District, PR China

Website: www.bohyarglobal.com

Portable Climbing Pipe Cutting and Beveling Machine Hydraulic Travel Cutter

 Solid Electric Heat Storage Boiler


Solid electric heat storage boiler using the night cheaper valley electricity, solar energy or wind generated electricity, storage heat into the solid materials and release heat at anytime for heating .The boiler can connect 380V,10KV or 35KV high voltage power.
Specifications
Small volume
Lower operating costs
Save investment of transformer

100% consume abandon wind electric

Related Products:off-peak electric heat storage boiler,solid electric heat storage system,electric heat storage boiler,solid heat storage electric boiler,solid heat storage boiler,electric solid heat storage boiler.



Solid electric heat storage boiler

Solid Electric Heat Storage Boiler

Solid Electric Heat Storage Boiler,Electric Heat Storage Equipment,High Voltage Electric Heat Storage Boiler,Heat Energy Storage Electric Boiler

Dalian Transen Technology Co.,Ltd. , http://www.transen-china.com