Many times we walk on the road and we often see sweepers contribute to providing us with clean roads. Sometimes I also think what brand of road sweeper needs to be used. Not enough. Today I don’t want to say what brands of cars. Well, it's all good and bad after all. But why use a road sweeper? Save money and increase work efficiency What is certain is that the cost per unit area of ​​cleaning is lower than that of labor. The emergence of road sweepers can achieve the liberation of the traditional sanitation workers' labor. Compared with the traditional cleaning work, the use of sweepers can more effectively complete the road sweeping work. The operation is very simple and it belongs to the driving type sweeping machine. One-man driving can complete the road sweeping work, and the efficiency is tens of times of the original manpower. This greatly improves work efficiency and reduces the cost of cleaning. The most important thing is that many cleaners were previously in a dangerous environment. With sweepers, they can keep them in a safe environment. According to statistics, the sweeping system for road sweepers is equivalent to 6-40 times the amount of labor. This data allows us to see how much the cost is needed if so much labor is required to clean the road, and so much manpower only needs an alternative to a road sweeper. It can also reduce the degree of dust pollution on the environment and use artificial to produce more dust, which we have all seen. The road sweeping vehicle can not only clean the garbage, but also can dust and purify the air medium on the road, which not only ensures the appearance of the road, maintains the sanitation of the environment, but also maintains the good working conditions of the road surface and reduces and prevents traffic accidents. Occurs and further extends the life of the road. The problem of uneven use of cleaning agents and inconsistent cleaning effects can be avoided. Road sweeper can solve many common problems Many government departments will have requirements for environmental indicators, so this has also attracted their attention. At least if you want to have the good name of a civilized city, you need to step up efforts in the environment. Dust or rubbish causes premature and excessive damage to the road surface. The frequent use of sweepers can not only solve those problems, but also allow citizens to live in a good environment, not only to improve the image of the city, but also to benefit the culture of the city. Construction and citizen work enthusiasm. (Text / Chen Shumei)
Continuous Waste Tyre Pyrolysis Plant
Pyrolysis Plant is used for recycling waste tire, waste plastic, waste rubber to fuel oil. According to the actual situation in every country and district, we developed different models of Batch Pyrolysis Plants for waste tires, rubber and plastic with daily capacity 25-40 tons.
Flowchat of Continuous Waste Tyre Pyrolysis Plant
Advantages of Continuous Waste Tyre Pyrolysis Plant
1. Large daily capacity of 25 MT raw materials, and can work 24 hours without any stop for 15-20 days;
2. Auto-loading, auto-discharging and oil coming out at the same time;
3. Only need fuel for the beginning 2-3 hours, then the sync gas generates itself is enough to support heating, saving fuel cost;
4. Low requirement on the raw materials, no need tiny granule, 5cm pieces acceptable for smooth running;
5. High efficiency condensers, more oil output, good quality oil, easy to clean.
6. Sync gas recycling system, fully burned after recycling and utilization, preventing pollution and saving fuel cost.
7. National patent smoke scrubber, can efficient remove the acid gas and dust of the smoke, environmental friendly to meet related national standards.
8. Easy to operate, need less manpower.
Technical Parameter of Continuous Waste Tyre Pyrolysis Plant
NO.
ITEM
Technical Parameter
1
Suitable Raw Materials
Small pieces of Waste tyre,rubber, waste plastic≤5cm
2
Operating Mode
Fully Continuous Operation
3
Structure
Horizontal Type Revolve
4
Loading and discharging
Fully Automatic Feeding and Discharging under High Temperature at Same Time
5
Capacity(24h)
8-20Mt
6
Work Pressure
Slightly Negative Pressure
7
Oil Yield of tyres
40%-45%
8
Reactor Rotational Speed
1R/M
9
Installation Power
110kw
10
Cooling Method
Cycle water
11
Type of Drive
Sprocket Wheel
12
Heating Method
Hot Air
13
Noise dB(A)
≤85
14
Main Reactor Weight (MT)
About 20Mt
15
Total Weight(MT)
About 45Mt
16
Installation Space Required
60m*20m
17
Manpower
2/shift
18
Shipment
5*40HC
19
Delivery time
≤70Days
Continuous Waste Tyre Pyrolysis Plant Continuous Pyrolysis ,Continuous Pyrolysis Plant,Continuous Waste Tyre Recycling,Waste Tyre To Oil Shangqiu Jinpeng Industrial Co., Ltd. , https://www.recyclings.nl