Corn Sheller,Hand Crank Corn Sheller,Maize Sheller,Large Capacity Maize Sheller Shuangfeng Nongjiabao Machinery Technology Co., Ltd , https://www.starchmachine.nl
Although the installation of pressure transmitter is very simple, we found that we should pay attention to the following six aspects:
1. Please read the product instruction manual carefully before installation and check the relevant information of the product.
2. The transmitter should be installed in a ventilated, dry, non-corrosive, cool place. If it is installed in the open air, it should be covered with a protective cover to avoid sunlight and rain, and to avoid the transmitter performance degradation or failure.
3, the transmitter is a precision instrument, when installed, avoid strong impact, beat.
4, according to the connection diagram correct connection.
5. Take care to protect the transmitter from the cable. When used at industrial sites, it is recommended to use metal pipe protection or overhead. Do not loosen the sealing nuts on the cable outlets to prevent moisture from entering.
6. When cleaning the pressure port and pressure hole of the transmitter, use trichloroethylene or alcohol to inject the pressure hole and shake it gently. Then pour out the liquid and repeat it several times. It is forbidden to use any device to protrude into the pressure hole to avoid damaging the sensitive core!
Pressure Transmitters
Precautions when installing the pressure transmitter
Before the pressure transmitter is installed and used, it is necessary to read the product sample and instruction manual carefully. The pressure interface must not be leaked during installation to ensure that the range and wiring are correct. The shell of the pressure sensor and transmitter must generally be grounded. The signal cable must not be mixed with the power cable. Strong electromagnetic interference should be avoided around the sensor and the transmitter.