China Internal Combustion Engine Industry Development Summit Forum
Anodic Oxidation, Aluminum or Aluminum Alloy products for the anode in the electrolyte solution for power handling, the use of electrolysis to the surface of the alumina film process, known as the anodized aluminum and aluminum alloy. After anodizing, the aluminum surface can generate a few microns or a few hundred microns of oxide film. Than the natural oxide film of aluminum, corrosion resistance, abrasion resistance and decoration has significantly improved and enhanced. Aluminum Die Casting with Surface Finishing Die Casting Surface Finish, Aluminum Die Casting Surface Finishing Exporter Ningbo Zhenhai Xinxie Machinery Co.LTD , https://www.xinxie-diecasting.com
On September 25, 2015, China's internal combustion engine industry development summit forum was held at the Nanling Campus of Jilin University. Xing Min, executive vice president and secretary-general of China Internal Combustion Engine Industry Association, elaborated on the development status, existing problems and solutions of the internal combustion engine industry. He specifically mentioned that “internal combustion engines are the most potential and most intuitively effective Products, as a mainstream power machinery for a long period of time, cannot be shaken." 
As the host of the summit, Li Yuanyuan, academician of the Chinese Academy of Engineering and president of Jilin University, stated that as a large exporter of internal combustion engines, the transformation of China into a manufacturing powerhouse for internal combustion engines still needs a process, and industry associations, universities, research institutes, and manufacturing companies must work together. This summit forum is a good platform for full communication and exchange in all aspects of the industrial chain.
He Guangyuan, the former Minister of China's Ministry of Machinery Industry, who has been concerned about the development of the internal combustion engine industry, has been at the summit forum despite his high age. As a witness to the development of China's machinery industry, He Guangyuan recalled the years of first-line work such as foundry and forging at the factory. Memories of the past are even more important for development. "The internal combustion engine industry has the potential to be tapped, especially in respect of energy saving and emission reduction." He Guangyuan pointed out that it was summed up in three sentences: First, the internal combustion engine is not a substitute in a short time, and it is still the dominant driving force in decades; Second, the internal combustion engine industry, energy-saving emission reduction, alternative fuels is the direction of efforts; Third, from the manufacturing of large-scale internal combustion engine to a manufacturing powerhouse, internal combustion engine technology advancement, we must start from the key components.
At the same time, around the sustainable development of the internal combustion engine industry in China, Jiang Deming, former president of Xi’an Jiaotong University, put forward three requirements: Continuous improvement of product quality is the core of sustainable development. The China-Internet Association strongly supports conditional parts manufacturers to set up laboratories. Conditional factories should strive to open up foreign markets and occupy overseas markets of their products as soon as possible. The China Association for Internal Cooperation must assist relevant departments in the strict enforcement of laws and impose heavy penalties on fraud.
According to the current status of automobile development, it is expected that the auto sector will dominate the domestic market by 2025, with a global market share of 15%. At the same time, the overall competitiveness of vehicle companies will increase significantly, forming 2-3 global competitiveness. The world famous brand.
The main Aluminum Die Casting Surface Finishing purposes are:
(1) improve the wear-resistant parts, corrosion resistance and weather resistance to corrosion.
(2) oxidation of a transparent film, coloring made from a variety of color film.
(3) as a capacitor dielectric film.
(4) binding with the organic coating. For coating the bottom.
(5) for the bottom of plating
Electrophoretic Paint (electrophoretic coating), also known as the electrophoretic coating, electrophoresis is becoming increasingly popular with the defects of conventional spray constantly emerge. Electrophoretic paint industry began to replace old ones, electrophoresis paint from the anode to the cathode electrophoretic paint, electrophoretic paint from a single component to the two-component electrophoretic paint, electrophoretic paint development also contributed to the development of the electrophoretic coating, so that more Products to use the spray technology but the use of electrophoresis.