Transmission Shaft,Heavy Duty Bus Parts ,Volkswagen Bus For Sale ,International Bus Parts Auto Parts Co., Ltd. , http://www.nbbusparts.com
Â
PERT-AL-PERT Pipe Line PERT-AL-PERT Pipe extrusion machine line PERT-AL-PERT Pipe production line is including below parts:
1.Aluminum foil unwinding machine  2.Aluminum foil storage device (with ultrasonic welding connector)  3.Aluminum pipe forming system  4.Ultrasonic welding machine  5.Single screw extruder, model SJ60×30 (inner layer PEX)  6.Single screw extruder, model SJ45×25 (inner and outer layer glue)  7.Extrusion die head  8.Single screw extruder, model SJ60×30 (outer layer PEX)  9.Cooling tank (with auto air sealing system for pipe)  10.Belt haul-off unit  11.Double station coiler
SUMMARY
l Material:                     PEX, Aluminum (overlap welding)
l Pipe size range:              Ø16-32mm
l Operating direction:          from right to left
l Center height:                1000 mm
l Machine color:                Jiangsu XinRong standard color (white)
l Cooling water consumption:    5 m3/h ( ≤20ºC,≥0.3MPa )
l Water pool volume:           10 m3
l Compressed air consumption:  0.3 m3/min ( >0.5MPa )
l Power supply:                3 phase 380V( ±10% ) 50Hz
l Total power:                  130 KW
l Actual power when operating:  ≈85 KW
l Overall dimension:            28000×3000×2500 mm
l Control system                 Â
Adopt German Siemens 10" inch human-machine interface, liquid crystal displayer, new generation programmable micro-computer control system, all operating parameters can define and show on the screen, and can setup and revise rotation speed, traction speed, melting temperature and each zone temperature.
• DC speed regulator         Eurotherm U.K
• Inverter:                 ABB or BOSCH-REXROTH
• Low-voltage electrical parts   Â
               Button, switch             Schneider, France
               Contactor                 Schneider, France
               Air switch                 Schneider, France
               Intermediate relay          Schneider, France
               Temperature controller      RKC, Japan
               Heater                    Magal ceramic heater
l Circumstance:
        Working place:              indoors
        Power supply:              no dangerous area
        Temperature:               0-40ºC
        Humidity:                   85% no condensation
Technical parameter
• Screw ,barrel:               38CrMoAlA,nitriding, polishing,             depth of nitriding 0.45-0.65 mm,             surface hardness HV800-900;                                                                                                         Â
• Sensor model:               PT131B ,50Mpa; power source 24V, output
                              0-10V.
• Screw diameter:             Ø60 mm
• L/D :                       30 :1Â
• Driving motor:            22KW (AC motor )
• AC inverter:                   ABB or BOSCH-REXROTH
• Capacity Max:          ≈ 50kg/h (PEX material, vary with different           materials and pipe size)
• Reduction gear box:          high torque, low noise, hard face special
                                    reduction Gearbox for extruder
• Lubrication system:       circulating oil enforced by oil pump,Â
                               infiltration and splash in oil basin
• Heating power:              20KW
• Cooling power:              4×0.18KW enforced air cooling
This is the aluminium roll forming unit.
Features:
To flatten, guide aluminum foil to form aluminum pipe.
Technical parameter            Â
• Number of forming wheel:    Ø16, 20, 25, 32mm  4 sets
• Aluminum alloy frame, nylon and copper wheel
This is the re-coiler of the PERT-AL-PERT Pipe Line PERT-AL-PERT Pipe extrusion machine line PERT-AL-PERT Pipe production line:
Â
Â
PERT-AL-PERT Pipe Line PERT-AL-PERT Pipe extrusion machine line PERT-AL-PERT Pipe production line is including below parts:
1.Aluminum foil unwinding machine  2.Aluminum foil storage device (with ultrasonic welding connector)  3.Aluminum pipe forming system  4.Ultrasonic welding machine  5.Single screw extruder, model SJ60×30 (inner layer PEX)  6.Single screw extruder, model SJ45×25 (inner and outer layer glue)  7.Extrusion die head  8.Single screw extruder, model SJ60×30 (outer layer PEX)  9.Cooling tank (with auto air sealing system for pipe)  10.Belt haul-off unit  11.Double station coiler
SUMMARY
l Material:                     PEX, Aluminum (overlap welding)
l Pipe size range:              Ø16-32mm
l Operating direction:          from right to left
l Center height:                1000 mm
l Machine color:                Jiangsu XinRong standard color (white)
l Cooling water consumption:    5 m3/h ( ≤20ºC,≥0.3MPa )
l Water pool volume:           10 m3
l Compressed air consumption:  0.3 m3/min ( >0.5MPa )
l Power supply:                3 phase 380V( ±10% ) 50Hz
l Total power:                  130 KW
l Actual power when operating:  ≈85 KW
l Overall dimension:            28000×3000×2500 mm
l Control system                 Â
Adopt German Siemens 10" inch human-machine interface, liquid crystal displayer, new generation programmable micro-computer control system, all operating parameters can define and show on the screen, and can setup and revise rotation speed, traction speed, melting temperature and each zone temperature.
• DC speed regulator         Eurotherm U.K
• Inverter:                 ABB or BOSCH-REXROTH
• Low-voltage electrical parts   Â
               Button, switch             Schneider, France
               Contactor                 Schneider, France
               Air switch                 Schneider, France
               Intermediate relay          Schneider, France
               Temperature controller      RKC, Japan
               Heater                    Magal ceramic heater
l Circumstance:
        Working place:              indoors
        Power supply:              no dangerous area
        Temperature:               0-40ºC
        Humidity:                   85% no condensation
Technical parameter
• Screw ,barrel:               38CrMoAlA,nitriding, polishing,             depth of nitriding 0.45-0.65 mm,             surface hardness HV800-900;                                                                                                         Â
• Sensor model:               PT131B ,50Mpa; power source 24V, output
                              0-10V.
• Screw diameter:             Ø60 mm
• L/D :                       30 :1Â
• Driving motor:            22KW (AC motor )
• AC inverter:                   ABB or BOSCH-REXROTH
• Capacity Max:          ≈ 50kg/h (PEX material, vary with different           materials and pipe size)
• Reduction gear box:          high torque, low noise, hard face special
                                    reduction gearbox for extruder
• Lubrication system:       circulating oil enforced by oil pump,Â
                               infiltration and splash in oil basin
• Heating power:              20KW
• Cooling power:              4×0.18KW enforced air cooling
This is the aluminium roll forming unit.
Features:
To flatten, guide aluminum foil to form aluminum pipe.
Technical parameter            Â
• Number of forming wheel:    Ø16, 20, 25, 32mm  4 sets
• Aluminum alloy frame, nylon and copper wheel
This is the re-coiler of the PERT-AL-PERT Pipe Line PERT-AL-PERT Pipe extrusion machine line PERT-AL-PERT Pipe production line:
Â
Pert-Al-Pert Pipe Line Pert-Al-Pert Pipe Extrusion Machine Line Pert-Al-Pert Pipe Production Line
Model NO.: XINRONG-EXTRUDER
Condition: New
Color: Blue and Grey
Voltage: Can Be Customed According to Request
Material: Pex Aluminium
Pipe Size: 16-32mm
Operation Direction: From Right to Left
Center Height: 1000mm
Cooling Water: 5 M3/H
Water Pool Volume: 10 M3
Power Supply: 3 Phase 380V 50Hz
Total Power: 130 Kw
Trademark: XR
Transport Package: Be Packaged by Plastic Film
Specification: 40000*1800*2000
Origin: China
HS Code: 8477200000
Model NO.: XINRONG-EXTRUDER
Condition: New
Color: Blue and Grey
Voltage: Can Be Customed According to Request
Material: Pex Aluminium
Pipe Size: 16-32mm
Operation Direction: From Right to Left
Center Height: 1000mm
Cooling Water: 5 M3/H
Water Pool Volume: 10 M3
Power Supply: 3 Phase 380V 50Hz
Total Power: 130 Kw
Trademark: XR
Transport Package: Be Packaged by Plastic Film
Specification: 40000*1800*2000
Origin: China
HS Code: 8477200000
PERT-AL-PERT Pipe Line PERT-AL-PERT Pipe extrusion machine line PERT-AL-PERT Pipe production line
The PERT-AL-PERT Pipe Line PERT-AL-PERT Pipe extrusion machine line PERT-AL-PERT Pipe production line is professional make the metal and plastic pipes. The metal is aluminium, the plastic material can be PE, PVC,and other plastic material. The aluminium metal can Aluminum material can improve the support performance of the pipe while Plastic materials can improve the corrosion resistance of pipes.
PERT-AL-PERT Pipe Line PERT-AL-PERT Pipe extrusion machine line PERT-AL-PERT Pipe production line
The PERT-AL-PERT Pipe Line PERT-AL-PERT Pipe extrusion machine line PERT-AL-PERT Pipe production line is professional make the metal and plastic pipes. The metal is aluminium, the plastic material can be PE, PVC,and other plastic material. The aluminium metal can Aluminum material can improve the support performance of the pipe while Plastic materials can improve the corrosion resistance of pipes.