Metal Injection Molding (MIM) Parts

Certification: ISO 9001:2000, ISO 9001:2008
Trademark: AT&M
Transport Package: Box and Pallet
Origin: China
Certification: ISO 9001:2000, ISO 9001:2008
Trademark: AT&M
Transport Package: Box and Pallet
Origin: China
CISRI Metal Injection Molding (MIM) plant has the capabilities to achieve an annual production of 300 tons of MIM products of different alloy powders, Annual output extends to 120 million pieces. Now we can research and develop many kinds of alloys and various new products to meet the demand of precision parts for many industries. It 's honored to be the certified supplier for more than ten renowned companies around the world. With 90% of the products exported to Japan, USA and Europe.

Main product series:
W, Mo, tungsten alloy products; Tool steel products; SUS316L, SUS440C, and 17-4pH stainless steel products; Low alloy steel products; Super-alloy and heat resistant alloy products; Titanium alloy products

Metal Injection Molding (MIM) advantage:
1. Directly manufacturing small sized part (0.1-200g) with complicated geometric shapes
2. The parts tolerance can be held to +/-0.1~0.5%, glabrous surface, up to Ra3.2.
3. The parts made by Metal Injection Molding (MIM) have high relative density (95%-99%),
4. More consistent microstructure and higher mechanical property.
5. High efficency and economic solution for mass production in high volume.
6. Extensive processing for many materials
Parameters Investment casting MIM
Minimum aperture diameter 2mm 0.4mm
Maximum depth of aperture Φ 2mm 2mm 20mm
Minimum wall thickness 2mm < 1mm
Maximum wall thickness unlimited 10mm
Φ 4mm tolerance ± 0.2mm ± 0.06mm
Surface finish(Ra) 5μm 1μm
 
Items The best Mill run
Angle ± 0.5 º ± 2 º
Density ± 0.2% ± 1%
Dimension ± 0.1% ± 0.3%
Roughness Ra ∠ 1μ m Ra∠5μm
Weight ± 0.1% ± 0.4%
 
MIM material Density 103kg /m3 Hardness Tensile strength Elongation%
Iron-based alloy PIM4600 7.68 85HRB 400 25
PIM4650 7.68 100HRB 600 15
Stainless steel 316L 7.94 52HRB 580 45
Tungsten alloy 95%W 18.1 HRC31 930 10
97%W 18.5 HRC33 890 6
Carbide alloy YG8X 14.9 HRA90    

Medical, Automotive, IT, Mechanical, Consumer applications
Materials Density Rockwell Hardness Tensile Strength Elongation
g/cm3 Rockwell MPa %

Iron-base alloy		 MIM-2200(S) 7.65 45HRB 290 40
MIM-2200(HT) 7.65 50HRC 380 20
MIM-2700(S) 7.65 69HRB 440 26
MIM-2700(Carbonitriding) 7.65 55HRC 830 9
MIM-4650(S) 7.55 90HRB 700 11
MIM-4650(HT) 7.55 48HRC 1655 2
MIM-8620(S) 7.5 85HRB 445 20
MIM-8650(HT) 7.5 35HRC 800-1300 5-9

Stainless
Steel		 MIM-316L(S) 7.8 67HRB 520 50
MIM-304L(S) 7.75 60HRB 500 70
MIM-17-4PH(S) 7.6 30HRC 900 6
MIM-17-4PH(HT) 7.6 40HRC 1185 5
MIM-440C(S) 7.5 45HRC 700 15
MIM-430(S) 7.5 65HRB 410 25
MIM-420 (HT) 7.25 45HRC 900 6
MIM-410(HT) 7.25 40HRC 900 7

Tool steel		 M2(S) 7.9 60HRC
 
 
M2(S) 7.9 63HRC
 
 
S7(S) 7.2 45HRC 1550 3
S7(HT) 7.2 59HRC 1850 2
Soft magnetic alloy FeSi3 7.5
 
 
 
Tungsten alloy 95%W-Ni-Fe 18.1 30 960 25
97%W-Ni-Fe 18.5 33 940 15
Hard metal alloy YG8X 14.9 HRA90 Banged
Strength
2300		  
CISRI Metal Injection Molding (MIM) plant has the capabilities to achieve an annual production of 300 tons of MIM products of different alloy powders, Annual output extends to 120 million pieces. Now we can research and develop many kinds of alloys and various new products to meet the demand of precision parts for many industries. It 's honored to be the certified supplier for more than ten renowned companies around the world. With 90% of the products exported to Japan, USA and Europe.

Main product series:
W, Mo, tungsten alloy products; Tool steel products; SUS316L, SUS440C, and 17-4pH stainless steel products; Low alloy steel products; Super-alloy and heat resistant alloy products; Titanium alloy products

Metal Injection Molding (MIM) advantage:
1. Directly manufacturing small sized part (0.1-200g) with complicated geometric shapes
2. The parts tolerance can be held to +/-0.1~0.5%, glabrous surface, up to Ra3.2.
3. The parts made by Metal Injection Molding (MIM) have high relative density (95%-99%),
4. More consistent microstructure and higher mechanical property.
5. High efficency and economic solution for mass production in high volume.
6. Extensive processing for many materials
Parameters Investment casting MIM
Minimum aperture diameter 2mm 0.4mm
Maximum depth of aperture Φ 2mm 2mm 20mm
Minimum wall thickness 2mm < 1mm
Maximum wall thickness unlimited 10mm
Φ 4mm tolerance ± 0.2mm ± 0.06mm
Surface finish(Ra) 5μm 1μm
 
Items The best Mill run
Angle ± 0.5 º ± 2 º
Density ± 0.2% ± 1%
Dimension ± 0.1% ± 0.3%
Roughness Ra ∠ 1μ m Ra∠5μm
Weight ± 0.1% ± 0.4%
 
MIM material Density 103kg /m3 Hardness Tensile strength Elongation%
Iron-based alloy PIM4600 7.68 85HRB 400 25
PIM4650 7.68 100HRB 600 15
Stainless steel 316L 7.94 52HRB 580 45
Tungsten alloy 95%W 18.1 HRC31 930 10
97%W 18.5 HRC33 890 6
Carbide alloy YG8X 14.9 HRA90    

Medical, Automotive, IT, Mechanical, Consumer applications
Materials Density Rockwell Hardness Tensile Strength Elongation
g/cm3 Rockwell MPa %

Iron-base alloy		 MIM-2200(S) 7.65 45HRB 290 40
MIM-2200(HT) 7.65 50HRC 380 20
MIM-2700(S) 7.65 69HRB 440 26
MIM-2700(Carbonitriding) 7.65 55HRC 830 9
MIM-4650(S) 7.55 90HRB 700 11
MIM-4650(HT) 7.55 48HRC 1655 2
MIM-8620(S) 7.5 85HRB 445 20
MIM-8650(HT) 7.5 35HRC 800-1300 5-9

Stainless
Steel		 MIM-316L(S) 7.8 67HRB 520 50
MIM-304L(S) 7.75 60HRB 500 70
MIM-17-4PH(S) 7.6 30HRC 900 6
MIM-17-4PH(HT) 7.6 40HRC 1185 5
MIM-440C(S) 7.5 45HRC 700 15
MIM-430(S) 7.5 65HRB 410 25
MIM-420 (HT) 7.25 45HRC 900 6
MIM-410(HT) 7.25 40HRC 900 7

Tool steel		 M2(S) 7.9 60HRC
 
 
M2(S) 7.9 63HRC
 
 
S7(S) 7.2 45HRC 1550 3
S7(HT) 7.2 59HRC 1850 2
Soft magnetic alloy FeSi3 7.5
 
 
 
Tungsten alloy 95%W-Ni-Fe 18.1 30 960 25
97%W-Ni-Fe 18.5 33 940 15
Hard metal alloy YG8X 14.9 HRA90 Banged
Strength
2300		  

Titanium Parts

Titanium Parts,Titanium Brass Stainless Steel,Titanium Machining Turning,Titanium Part Custom Machining

Shenzhen Yuheng Precision Machinery Co., Ltd. , https://www.ypcncmachining.com