Pre-notice on the Symposium on 2006 Chlor-Alkali Rectification Technology

All relevant units:
With the continuous deepening of rectification technology reform, the chloro-alkali enterprises' rectification technology has developed rapidly in the past two years, new equipment and new technologies have emerged continuously, and the level of technology has been continuously improved. In accordance with the practice of the chlor-alkali rectification advisory group meeting once every two years, the China Chlor-Alkali Industry Association decided to hold a chloro-alkali rectification technology seminar in September 2006. Specific time and place will be notified separately. In order to make the participants understand the meeting and prepare for the meeting in advance, the relevant issues are hereby notified as follows:
I. Content of the meeting
1. Summing up the progress of chloro-alkali rectification technology over the past two years, the dynamics of technological transformation of enterprises and the application of new technologies and equipment, operating experience and existing problems.
2. Technical papers and related information exchange.
3. Technical advice, answer difficult questions.
4. Introduction of recently introduced chlor-alkali (electrolytic) rectifiers.
5. Excellent paper selection and awards.
6. Rectification expert group meeting.
7. Rectification device visits.
2. The conference papers will be fully discussed. The conference will edit and publish the "2006 Symposium on Chlor-Alkali Rectification Technology Symposium". Ask the experts of the consultation group to choose their own topics, write at least one paper, and welcome all manufacturers and research institutes. The production technicians and scientific researchers of the relevant units enthusiastically contributed.
(I) Content requirements of the paper
1. Discussion on a 110 kV direct drop rectifier.
2. Application status and evaluation of three-phase five-leg rectifier transformer.
3. According to different types of electric tank selection of on-load switch.
4. The discussion of the new technology adopted in the new rectifier.
5. Discussion on the design of integrated automation for power stations.
6. The flow measurement technology of rectifier components.
7. Field bus technology in the application of the rectifier system.
8. Developments in high-frequency switching rectifiers.
9. Filter device design and effect research.
10. Research on the status of direct supply rectifiers for power plants.
11. At present, the domestic power supply department is dynamic about harmonic detection.
12. The DC voltage rating is reasonably determined.
13. Rectification station wiring and harmonic control.
14. Structural characteristics of chlor-alkali industry rectifiers.
15. The stable operation of the rectifier.
16. thyristor control trigger circuit.
17. Rectification device operation and management experience.
18. Accident analysis of the rectifier.
19. Application of new technology and materials for rectifiers.
20. Auxiliary equipment of the rectifier.
21. Other content papers may refer to various aspects of rectification technology and require the articles to be practical and instructive. The data cited in the article should be accurate and reliable. The article references are complete.
(2) Awards In order to encourage the authors of the papers, excellent paper selection activities will be held during the conference, and all the conference papers have the opportunity to win awards. The first prize is 1,000 yuan per article, and the second prize is 500 yuan per article.
(C) the paper format and related requirements The conference paper will be included in the "2006 chloro-alkali rectification seminar Symposium", so the paper layout requirements are as follows:
1. All papers are written in Word format. If an article is illustrated with an illustration, please draw it clearly and paste it in the corresponding location of the Word document for unified layout.
2. The author is requested to send the article by e-mail to the following e-mail before August 20, 2006, and indicate the specific contact information.
3. The articles of this conference will be given priority in the "China Chlor-Alkali" magazine. Copyright belongs to "China Chlor-Alkali" magazine. Please do not vote for him.

Contact address: Room 1105, Tianjin Electronic Technology Center, No. 186, Baidi Road, Nankai District, Tianjin Postcode: 300192
Contact person: Liu Dongsheng Xing Jun Tel: 022-27428286 Fax: 022-27428220
E-mail:



China Chlor-Alkali Industry Association
May 18, 2006

Car Interior Accessories

Dashboard Decoration,Automotive Interior Lights,Multi Color Led Lights For Car,Red Interior Seat Covers

Ningbo Longyang Auto Products Co., Ltd. , https://www.nblongyang-manufacturer.com